Description
ANIUSB-MATRIX USB Audio Network Interface with Matrix Mixing
Audio network interface connects up to 4 Dante channels and 1 analog output to a room's audio and video conferencing system via USB connection. Internal matrix mixer offers flexible routing, allowing users to route any input to any output.
The ANIUSB-MATRIX USB Audio Network Interface complements the existing ANI4IN, ANI4OUT, and ANI22 products. It offers the ideal performance, connectivity, and affordability for audio/video conferencing installations in small and medium-size meeting rooms when a premium microphone solution is desired, and acoustic echo cancellation of an A/V conferencing codec will be used.
The ANIUSB-MATRIX connects 4 Microflex Advance or Microflex Wireless microphone channels via Dante (4 in / 2 out), provides analog connectivity (1 block in / 1 block out) to a room audio/video conferencing system or a PC-based A/V conferencing application via USB (1 in/out).
An internal matrix mixer offers flexible routing, allowing users to route any input to any output. A 4-band parametric EQ filter is also available on the analog and USB outputs.
FEATURES
- Connects 4 Dante audio inputs and 1 analog input to a AV conferencing system or a PC-based videoconferencing application
- Flexible signal routing and connectivity: analog audio (1 block in / 1 block out) to room AV conferencing system; USB (1 in/out) to connect to laptop or room PC
- Dante Domain Manager / Device Lock compatible . (Add “DDM Ready” icon)
- Easily setup and deploy settings with Designer System Configuration Software
- Power-over-Ethernet (PoE) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without equipment rack
Specifications
- Analog Connections
- Input (1) 3-pin block connector (Active Balanced)
- Output (1) 3-pin block connector (Impedance Balanced)
- USB Connections
- (1) USB 2.0, Type B
- Single port carries 1 input and 1 output channel (Summed mono)
- Network Connections (Dante Digital Audio)
(1) RJ45 - 4 input channels, 2 output channels
- Polarity
- Non-inverting, any input to any output
- Power Requirements
- Power over Ethernet (PoE), Class 0. (PoE Plus compatible).
- Power Consumption
- 6.5W, maximum
- Weight
- 668 g (1.5 lbs)
- Dimensions H x W x D
- 4 x 14 x 12.8 cm (1.6 x 5.5 x 5.0 in.)
- control application
- HTML5 Browser-based
- Operating Temperature Range
- −6.7°C (20°F) to 40°C (104°F)
- Storage Temperature Range
- −29°C (-20°F) to 74°C (165°F)
- Thermal Power Dissipation
- Maximum 6.8W (23.0BTU/hr)
- typical 6.0W (20.8BTU/hr)
Audio
- Frequency Response
+1, -1.5 dB - 20 to 20,000 Hz
- Dante Digital Audio
- Sampling Rate 48 kHz
- Bit Depth 24
- USB Audio
- Sampling Rate 44.1, 48 kHz
- Bit Depth 16, 24
- Latency
Does not include Dante latency - Analog to Analog 0.98 ms
- Analog to Dante 0.39 ms
- Dante to Analog 0.72 ms
- Dante to Dante 0.14 ms
- Dynamic Range
20 Hz to 20 kHz, A-weighted, typical - Analog-to-Dante 113 dB
- Dante-to-Analog 117 dB
- Equivalent Input Noise
20 Hz to 20 kHz, A-weighted, input terminated with 150? - Line -86 dBV
- Aux -98 dBV
- Total Harmonic Distortion
@ 1 kHz, 0 dBV Input, 0 dB analog gain - <0.05%
- Common Mode Rejection Ratio
150? balanced source @ 1 kHz - >70 dB
- Impedance
- 10.6 kΩ
- Input Clipping Level
- Line +27 dBV
- Aux +15 dBV
- Output Clipping Level
- Line +20 dBV
- Aux +0 dBV
- Mic -26 dBV
- Built-in Digital Signal Processing
- Per Channel Equalizer (4-band Parametric, Analog and USB output channels only), Mute, Limiter, Gain (140 dB range)
- System Matrix mixer
Networking
- Cable Requirements
- Cat 5e or higher (shielded cable recommended)
