Description
Blackmagic Design HyperDeck Extreme Control
HyperDeck Extreme Control adds traditional broadcast deck controls to HyperDeck Extreme 8K. It works like a traditional broadcast deck with a familiar layout. Control up to 8 decks via industry standard RS-422 control.
Specifications
Description
HyperDeck Extreme Control adds traditional broadcast deck controls to HyperDeck Extreme 8K. It works like a traditional broadcast deck with a familiar layout. Control up to 8 decks via industry standard RS-422 control.
Connections
- Deck Control Outputs
- 8 x RS-422
- Reference Input
- Tri-Sync or Black Burst.
- Reference Output
- Follows reference input.
- Ethernet
- 1Gb/s
- Computer Interface
- 1 x USB-C for software updates.
Supported Protocols
- Control Protocols Sony
Software
- Internal Software Upgrade
- Loaded at system start, or via Blackmagic HyperDeck Setup using USB port.
Operating Systems
- Mac 10.14 Mojave, Mac 10.15 Catalina or later.
- Windows 8.1 or Windows 10.
Displays
- 8 digit, 7 segment LED timecode display.
Power Requirements
- Power Supply
- 1 x Internal 100 - 240V AC.
- 1 x 4 pin XLR 12V DC IN for external power or battery use.
Physical Installation
3 rack units height, half rack width.
Physical Specifications
- Weight: 3.53 lbs
- Width: 8.28"
- Height: 5.14"
- Depth: 13.83"
Environmental Specifications
- Operating Temperature:
- 0° to 40° C (32°to 104° F)
- Storage Temperature:
- -20° to 60° C (-4° to 113° F)
- Relative Humidity:
- 0% to 90% non-condensing
What's Included
- HyperDeck Extreme Control
- SD card with user manual.
Warranty
12 Month Limited Manufacturer's Warranty.
