Audix DP5A Professional 5-Piece Drum Mic Package

(No reviews yet) Write a Review
SKU:
DP5A
UPC:
687471401095
Weight:
12.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • Audix DP5A Professional 5-Piece Drum Mic Package
  • Audix DP5A Professional 5-Piece Drum Mic Package
  • Audix DP5A Professional 5-Piece Drum Mic Package
  • Audix DP5A Professional 5-Piece Drum Mic Package
  • Audix DP5A Professional 5-Piece Drum Mic Package
  • Audix DP5A Professional 5-Piece Drum Mic Package
  • Audix DP5A Professional 5-Piece Drum Mic Package
  • Audix DP5A Professional 5-Piece Drum Mic Package
  • Audix DP5A Professional 5-Piece Drum Mic Package
$749.00

Description

The DP5A is a perfect complement of dynamic microphones for close miking a 5 piece kit.  All mics perform equally well whether it be on a live stage or in the studio.

All mics and clips are conveniently packaged in a foam-lined aluminum carrying case for travel or safe keeping when the mics are not in use.

D6 for Kick Drum

The D6 has a frequency response of 30Hz-15kHz and is characterized with a cardioid pick-up pattern. The D6 is designed for easy positioning and and is not dependent on finding the "sweet spot" of the drum.  The D6 capsule features the same legendary VLM technology that has made the D Series microphones extremely popular for today's live stages and recording studios.

i5 for Snare

The i5's cardioid polar pattern allows it to focus on the specific instrument that is being miked while rejecting other instruments or ambient noise on stage. With a smooth and uniform frequency response of 50 Hz-16 kHz and an ability to handle sound pressure levels in excess of 140 dB, the i5 can be used for a wide variety of applications and for all genres of music.

D2s for Rack Toms

For bringing out the natural, dynamic sound of toms or congas, nothing compares to the D2! The D2 accurately reproduces the warmth and punch required for a successful percussion sound,  avoiding the typical muddy "boom" that can mar a good stage mix or a recording.  The D2's natural warmth makes it a great choice for many instruments including saxophone, brass and woodwinds.  

D4 for Floor Tom

The D4, with an exceptional frequency response of 40 Hz - 18 kHz,  will successfully capture the true sound of instruments that require bass reproduction.   When it comes to the attack, harmonics, and decay of the large toms, the D4 is a perfect choice.   Lightweight and easy to position, the D4 is also an excellent choice for cajon, djembe, tympani, leslie bottom, bass flute, saxophone, bass cabinets and small kick drums.

Package Contents

  • 1 x Aluminum road case
  • 1 x i5 snare mic
  • 2 x D2 tom mics
  • 1 x D4 floor tom mic
  • 1 x D6 kick mic
  • 4 x DVICE gooseneck clips
  • 1 x MC1 mic clip
  • 1 x DCLIP mic clip
View AllClose

Specifications

D6 Kick Drum Microphone 

Transducer Type Dynamic
Frequency Response 30 Hz - 15 kHz
Polar Pattern Cardioid
Output Impedance 200 ohms
Sensitivity 0.8 mV / Pa @ 80 Hz
Capsule Technology VLM Type E
Off Axis Rejection >20 dB
Maximum SPL ≥144 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Machined Aluminum / Black Hard Coat
Weight 217 g / 7.7 ounces
Length 117 mm / 4.6 inches

i5 Multi-Purpose Instrument Microphone

Transducer Type Dynamic
Frequency Response 50 Hz - 16 kHz
Polar Pattern Cardioid
Output Impedance 150 ohms
Sensitivity 1.5 mV / Pa @ 1k
Capsule Technology VLM Type B
Off Axis Rejection > 23 dB
Maximum SPL ≥ 140 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Die cast Zinc Alloy / Black E-coat
Weight 183 g / 6.5 ounces
Length 141.5 mm / 5.6 inches

D2 Dynamic Instrument Microphone 

Transducer Type Dynamic
Frequency Response 80 Hz - 18 kHz
Polar Pattern Hypercardioid
Output Impedance 250 ohms
Sensitivity 1.2 mV / Pa @ 1k
Capsule Technology VLM Type B
Off Axis Rejection >30 dB
Maximum SPL ≥144 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Machined Aluminum / Black Hard Coat
Weight 128 g / 4.5 ounces
Length 100 mm / 3.9 inches

D4 Dynamic Microphone

Transducer Type Dynamic
Frequency Response 40 Hz - 18 kHz
Polar Pattern Hypercardioid
Output Impedance 200 ohms
Sensitivity 1.4 mV / Pa @ 1k
Capsule Technology VLM Type D
Off Axis Rejection >20 dB
Maximum SPL ≥144 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Machined Aluminum / Black Hard Coat
Weight 128 g / 4.5 ounces
Length 100 mm / 3.9 inches

View AllClose

0 Reviews

View AllClose