Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


ELEMENT Externally-polarized (DC bias) condenser


  • Cardioid
  • Omnidirectional
  • Figure-of-eight


LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV), re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 155 dB SPL, 1 kHz at 1% T.H.D.; 165 dB SPL, with 10 dB pad (nominal)
DYNAMIC RANGE (typical) 141 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 80 dB, 1 kHz at 1 Pa
SWITCHES Polar selection; Flat, roll-off; 10 dB pad (nominal)
WEIGHT 524 g (18.5 oz)
DIMENSIONS 188.0 mm (7.40") long, 53.4 mm (2.10") maximum body diameter
OUTPUT CONNECTORS Integral 3-pin XLRM-type

Find Similar Products by Category

Vendors Other Products

Audio-Technica AT4047MP Multi-Pattern Condenser Microphone

4.00 LBS
Usually ships within 24 hours
Calculated at checkout

Product Description

The AT4047MP is a large-diaphragm side-address externally polarized (DC bias) condenser microphone with three switchable polar patterns: omnidirectional, cardioid, and figure-of-eight. It is designed to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement. The microphone requires 48V phantom power for operation.

The omnidirectional polar pattern is sensitive to sound coming from all directions. Select the omni pattern to pick up several voices or instruments on the same microphone, to diminish proximity effect, and to preserve the location’s ambient sound.

The cardioid polar pattern is more sensitive to sound originating directly in front of the element, making it useful in controlling feedback, reducing pickup of unwanted sounds and providing isolation between performers.

The figure-of-eight polar pattern is more sensitive to sound originating in the front and back of the microphone, rejecting sounds from the sides. It is often used in conjunction with advanced stereo miking techniques. The output of the microphone is a 3-pin XLRM-type connector.

The microphone is equipped with a switchable 10 dB pad and a switch that permits choice of flat response or low-frequency roll-off (via integral 80 Hz high-pass filter). The microphone is enclosed in a rugged housing. The included AT8449/SV shock mount provides superior isolation and permits mounting on any microphone stand with 5/8"-27 threads. A dust cover and a protective carrying case are also included.


  • Three switchable polar patterns: cardioid, omnidirectional, figure-of-eight
  • Engineered to meet the critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • Transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs
  • Exceptionally low self-noise, wide dynamic range and high SPL capability
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Vintage silver-matte finish on microphone and shock mount
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • Custom shock mount provides superior isolation
  • Integral 80 Hz high-pass filter switch and 10 dB pad switch
  • Certified by the METAlliance (Music Engineering and Technology Alliance)

Accessories Furnished

AT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case.