Description
Send ADAT over Cat5, up to 100 meters!
Without any kind of compression or other potentially sound-degrading conversions, the input signal is 100% bitwise transmitted in real time to the output. Ideally suited for connecting your PC to your HiFi equipment, for upgrading your network cabling to a true HiFi-capable sound bridge, or to listen to music in uncompromising quality anywhere you can reach with standard network cabling. Or use the extender in your recording studio to overcome the 5 meter length limit of ADAT connections!
Features
- Lossless, uncompressed 1:1 transmission
- Standard TOSLINK optical jacks at input and output
- Eliminates hum, buzz and noise thanks to galvanic isolation (ground loop removal)
- Near-zero latency (<1µs)
- Compatible with all digital audio formats (ADAT Lightpipe, SPDIF, AC-3 (Dolby Digital ®), DTS® etc.)
- up to 96 kHz sample rate / 12.5 MBit signalling rate
- Cost-effective installation using standard Cat5 network cabling
- Quality product "Made in Switzerland"
Includes
- Transmitter (TOSLINK->Cat5 Cable adapter)
- Receiver (Cat5 cable->TOSLINK adapter)
- AC adapter in "green" switching technology
- Printed manual
Specifications
- Input/Output Optical connector, F05 Type TOSLINK®compatible
- Maximum distance between sender and receiver 100m (328 ft.)
- Transmitted audio formats ADAT, SPDIF, Dolby Digital ® 5.1 and other TOSLINK compatible formats (up to 96 kHz sample rate/15 Mbit data rate)
- Power supply 9..12VDC 100mA
- Plug:ID=2.5mm OD=5mm Length=9mm Polarity: Center Positive
