Description
16x16 AUDIO MATRIX PROCESSOR
With an unrivalled price-performance ratio, AHM-16 delivers a 16x16 matrix with uncompromised processing for single room applications and smaller multi-room environments including bars, restaurants, shops and school halls.
- 16x16 processing matrix
- Sound management + installation
- 8x8 local analogue I/O
- Screen + 4 SoftKeys
- I/O Port for audio networking, up to 128x128
- Dante 96kHz option card
- 16 configurable processing outputs
- Automatic Mic Mixer
Feature List
- 16x16 processing matrix
- 8x8 local analogue I/O
- I/O Port for audio networking, up to 128x128
- Dante 96kHz option card (AES67 and DDM ready)
- SLink 128x128 option card for audio expansion
- 16 configurable processing outputs – mono / stereo zones or speaker processing
- 96kHz FPGA core with ultra-low latency
- Front panel screen and navigation
- 4x SoftKeys
- Compatible with IP1, IP6, IP8 remote controllers
- 2x2 local GPIO plus networkable GPIO interface
- TCP/IP protocol for third party integration
- Crestron, AMX and Extron drivers
- Mac / Windows System Manager software
- Custom Control app and editor for BYOD
- 4 user profiles
- Integrated stereo playback
- Event scheduler
ALWAYS IN CONTROL
In addition to remote controllers, GPIO and 3rd party integration, AHM-16 has a front panel screen and 4x programmable SoftKeys for intuitive volume control, source select, preset recall and more.
SOUND MANAGEMENT
- Automatic Mic Mixer
- ANC (Ambient Noise Compensation)
- Priority Ducking
- 8-band PEQ, dynamics and delay on every input and zone
- Speaker processing with x-over filter, delay, limiter and PEQ
Specifications
Inputs
- Mic/Line Inputs Balanced, +48V phantom power
- Mic/Line Preamp Fully recallable
- Input Sensitivity -60 to +15dBu
- Analogue Gain +5 to +60dB, 1dB steps
- Pad -20dB Active PAD
- Maximum Input Level +30dBu (PAD in)
- Input Impedance > 3kQ (Pad out), >8k0 (Pad in)
- Mic EIN -127dB with 1500 source
Outputs
- Analogue Outputs Balanced, Relay protected
- Output Impedance <750
- Nominal Output +4dBu = 0dB meter reading
- Maximum Output Level +21dBu
- Residual Output Noise -92dBu (muted, 22-22kHz)
Dimensions and Weights
- Width x Depth x Height x Weight
- Unboxed 402. 0mm X 2/Umm x 44mm x 3.0kg
- Boxed 555 x 385 x 150 mm x 5.1kg (21.8* x 15.2' x 5.9* x 11.2lbs)
System
- Measured balanced XLR in to XLR out, 20-20kHz, + 5dB Gain, Pad out, signal @ 0dB (meter)
- Dynamic Range 1080B
- System Signal to Noise -92d8
- Frequency Response 20Hz - 20kHz +0/-0.5dB
- THD +N (analoque in to out) 0.005% @ +16dBu output, 1kHz + 5dB gain
- Headroom +18dB
- Sampling Rate 96kH2 +/- 20 PPM
- Acoustic Noise Typical loading. 22 deg C ambient
- No VO Port installed 31dBA
- With I/O Port installed 33dBA
- Operating Temperature 0 deg C to 40 deg C
- Range (32 deg F to 104 deg f)
- Mains Power 100-240V AC. 50-60Hz, 65W max
