Loading... Please wait...
  • Image 1

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Input Sensitivity Mic: -78 to -12dBm in steps of 6dB on Mic into 600 ohms
Line +24 to -42 in 6 dB steps
All Inputs & Outputs are Transformer Fully Balanced and Floating.
Output Maximum: +23dBm into 10k
Frequency Response:
+01-1dB from 20Hz and 115KHz with EQ switched out
-3 dB points at 8.5Hz and 120KHz with EQ switched out
Noise: Better than -125dB measured from 10Hz to 20KHz
Signal to Noise: Better than 82dB @ 1000Hz with input at +4dBu
Distortion: Typically <.01%. Better <.025 at full power at all Frequencies
HF Controls: 5 Switched frequencies 7K, 10K, 12.5K, 15K, 20K Plus OFF with continuously variable boost/cut max of +1- 20d8
Mid Controls: 6 Switched frequencies 0.36K, 0.7K, 1.3K, 2.4K, 3.6K , 5.8K Plus OFF with continuously variable boost/cut max +1- 21dB
Low Controls: 5 Switched frequencies 40Hz, 60Hz, 100Hz, 160Hz, 200Hz Plus OFF with continuously variable boost/cut max +/- 20dB

Find Similar Products by Category

Vendors Other Products

Wunder Audio PEQ2 Class-A discrete 1970's Style Mic-Pre / EQ Module

3.00 LBS
Usually ships within 24 hours.
Calculated at checkout

Product Description

PEQ2 Single Module

The PEQ2 is a fully Class-A discrete 1970's-style mic-pre/equalizer. It can directly replace the 1073. The 18-way gold plated Amphenol connector will mate with vintage Neve "80 Series" consoles or racks. The similarity to the 1073 stops there! We've taken the PEQ1 and enhanced it to make it even better!

New Features

  • NEW output stage added to the tail end, just before output transformer, for greater maximum gain.
  • Upgraded "NICO" transformers (Nickle/Iron/Colbalt).
  • Improved Gain switches with over 3 x the gold contact area per switch position.
  • Improved EQ switches with over 3 x the gold contact area per switch position.
  • Light pipe pushbuttons, as used in the Wunderbar Console.
  • Discrete, active high pass filter.
  • LED metering with Green signal indicator and Red clip light.
  • Gain knob now has one extra counter clockwise position to achieve -6db less gain (-24dB instead of -18dB like on old units).
  • Totally redesigned enclosure with thicker gauge metal for superior shielding and better RF protection.
  • Thicker faceplate.
  • 1% Metal Film resistors for lower noise floor and better matching from channel to channel.
  • Sturdier amp compensation or RF rejection capacitors.
  • New PCB with revised and optimized component layout with beefier traces.
  • RF filtering.