Description
BC1-THD Stereo bus compressor
The BC1-THD replaces the BC1-LTD, with a new sleek black, reorganized faceplate.
Features:
- Blend control for parallel compression.
- All controls stepped for easy recall.
- High Pass filter on the sidechain.
- External sidechain input.
- Smooth compression.
The THD differs from the BC1-S in that it adds:
- “Grab switch” - adds snappier more apparent compression character
- “THD switch” - adds more overdrive and color
- More attack settings
- 3 selectable high pass filters
Specifications
Noise floor: below -104dBm
Frequency response: 20Hz to 20kHz less than -0,025dB
Frequency response: 20Hz to 80kHz less than -0,3dB
Blend control fully CW (dry)
- THD+N @ 0dBu: less than 0,0045%
- THD @ 0dBu: less than 0,001%
- THD+N @ +26dBu: less than 0,02%
- THD @ +26dBu: less than 0,02%
Blend control fully CCW (straight)
- THD+N @ 0dBu: less than 0,00045%
- THD+N @ +26dBu: less than 0,0003%
Input impedance: 40kohm
Output impedance: 50ohm
Max input level: +26dBu
Max output level: +27dBu @ 600ohms load
Features:
- Threshold: -20dB to +20dB
- Ratio: 1.5:1 / 2:1 / 4:1 / 10:1 / Hard
- HP Filter: 150Hz, -6dB octave
- External sidechain: in/out
- Dual or single sidechain detectors
- Attack: UF(ultrafast)/0.1/0.3/0.6/1/3/10/30/60/120mS
- Release: 50mS/100mS/300mS/600mS/1.2S/Auto
- Gainreduction meter
- Make-up: 0 to +20dB
- Compression in/out
- Straight signal mute
- Blendcontrol: from dry to compressed
- External sidechain input: unbalanced TRS jacks
- Internal, regulated powersupply with a toroidal transformer
- 115 or 230V, selectable
- Dimensions: 22" W x 5" H x 14" D
- Weight: 11 LBS
