Description
The BLX14 Bodypack Wireless System is part of the BLX wireless systems family. Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.
It includes BLX1 bodypack transmitter, BLX4 single-channel receiver, guitar cable, power supply, 2 AA batteries, and user guide.
BLX1 Bodypack Transmitter
The durable BLX1 features a lightweight, ergonomic design and adjustable gain control. For use with BLX Wireless Systems. It supports up to 14 hours of continuous use with 2 AA batteries. 300 ft (100 m) transmission radius.
Features
- Quick and easy receiver frequency matching
- TQG connection for use with Shure lavalier, headset, earset and instrument microphones and guitar cables
- Easily accessible On / Off switch
BLX4 Single Channel Receiver
This is single channel wireless receiver with microprocessor-controlled internal antenna diversity. The durable BLX4 features simple setup, intuitive controls, and microprocessor-controlled internal antenna diversity. One-touch QuickScan frequency selection quickly locates the best open frequency in case of interference. For use with BLX Wireless Systems.
Features
- XLR and ¼" output connectors
- Two-color audio status indicator LED
- Green: Normal audio levels
- Red: Excessive audio levels (overload / clipping)
WA302 Instrument Cable
Instrument cable connects the T1, UT1, SC1, BLX1, PG1, PGX1, GLXD1, QLXD1, SLX1, LX1, ULX1, UC1, UR1, UR1M and U1 body-pack trasmitter to a guitar or other instrument.
Features a 2.5 foot (0.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F) (supplied with instrument systems).
Specifications
Overall System Specifications
- Operating Range: 300 ft (91 m) line of sight
(actual range depends on RF signal absorption, reflection and interference) - Available Frequencies: Between 524 – 865 MHz
(available frequencies depend on applicable regulations in country where system used) - Audio Range: 50 – 15,000 Hz
(dependent on microphone type) - Transmitter RF Output Power: 10 mW, typical (varies by region)
- Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced
- Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
- Battery Life: Up to 14 hours
- Dynamic Range: 100 dB A-weighted
- System Distortion: 0.5% THD typical
(ref. +/- 38 kHz deviation, 1 kHz tone) - Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
- BLX4 Power Requirements: 12 – 18 V DC at 150 mA, supplied by external power supply
BLX1 Bodypack Transmitter
- Audio Input Level
- Gain max -16 dBV maximum; min (0 dB) +10 dBV maximum
- Gain Adjustment Range 26 dB
- Input Impedance 1 MΩ
- RF Transmitter Output 10 mW, typical (varies by region)
- Dimensions 110 mm x 64 mm x 21 mm (H x W x D)
- Weight 75 g (2.6 oz.), without batteries
- Housing Molded ABS
- Power Requirements 2 LR6 AA batteries, 1.5 V, alkaline
- Battery Life up to 14 hours (alkaline)
BLX4 Single Channel Receiver
- Output Impedance
- XLR connector 200 Ω
- 6.35 mm (1/4") connector 50 Ω
- Audio Output Level
Ref. ±33 kHz deviation with 1 kHz tone - XLR connector –27 dBV (into 100 kΩ load)
- 6.35 mm (1/4") connector –13 dBV (into 100 kΩ load)
- RF Sensitivity -105 dBm for 12 dB SINAD, typical
- Image Rejection >50 dB, typical
- Dimensions 40 mm X 188 mm X 103 mm (H x W x D)
- Weight 241 g (8.5 oz.)
- Housing Molded ABS
- Power Requirements 12–15 V DC @ 160 mA (BLX88, 320 mA), supplied by external power supply (tip positive)
