Shure A15TG Microphone Level Tone Generator

(No reviews yet) Write a Review
SKU:
A15TG
UPC:
042406053969
Weight:
0.30 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
$163.00

Description

The Shure A15TG Tone Generator is a battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.The output level of the A15TG is approximately -42 dBV. This allows it to be used with either microphone level or line level inputs and the barrel design allows it to be connected to a microphone cable or directly to a mixer input.

The A15TG can tolerate the presence of phantom power or a short circuit in the line that it is driving. Additional features of the A15TG include a recessed On-Off switch, a Male XLR output connector, and a removable end cap allowing for easy battery installation and removal. Battery life is 1,000 hours of continuous use.

Batteries
Use any 1.5 volt button cell battery that fits in the allotted space. This includes A76 alkaline, 357 silver oxide, and 675 zinc air hearing aid batteries.

View AllClose

Specifications

Output Frequency 700 Hz +20%, when terminated with 150 Ω
Output Level -41.5 +4.5 dBV (8.4 mV typical) when terminated with 150 Ω
Total Harmonic Distortion 5% typical for any output termination greater than or equal to 150 Ω
Output Impedance <15 Ω
Battery Type 1.5 V cell (such as A76 alkaline, 357 silver oxide or 675 zinc-air hearing aid battery)
Temperature Range

  • Operating:-12°C to 50°C (10° F to 130°F)
  • Storage:-29°C to 74° C (-20° F to 165°F)

Case Steel with gray enamel finish
Dimensions 19 mm (3/4 in.) diameter; 141 mm (5 17/32 in.) long
Certification Conforms to European Union directives, eligible to bear CE marking; meets European Union EMC Immunity Requirements (EN 50 082-1, 1992)

View AllClose

0 Reviews

View AllClose