Pnamax MIP-15LT MAX Image Pro LT 15 Amp

(No reviews yet) Write a Review
SKU:
MIP-15LT
Weight:
4.70 LBS
Shipping:
Calculated at Checkout
$199.95

Description

MIP-15LT
MAX Image Pro LT 15 Amp

FIREWALL FOR NOISE™ CIRCUITRY
This technology provides enhanced Neutral-to-Ground Noise Filtration for your digital office equipment. EMI/RFI noise can contaminate the equipment safety ground, which in turn will contaminate the connected digital equipment, and prevent it from operating at peak performance levels.

​GFCI COMPATIBILITY
This circuit features an improved 2-stage common-mode architecture that provides compatibility for GFCI’s per NEC article 250.6. Complies with UL 1283: Electromagnetic Interference Filters.

NOISE FILTRATION
Circuitry prevents EMI/RFI noise from contaminating the connected digital equipment through the ground wiring.

AUTOMATIC VOLTAGE MONITORING (AVM)
This power monitoring system acts as a gate to prevent unsafe voltages from damaging sensitive electronic equipment. It automatically detects a prolonged over-voltage or under-voltage and disconnects the power to the connected equipment, then reconnects it when the power returns to a safe level. It even protects the MIP-20LT unit.

SIGNALPERFECT™ TELEPHONE LINE PROTECTION
RJ-11 phone jacks are available to protect a single-line telephone modem (pins 4,5 protected) with fuseless Auto-Resetting technology and optimized circuitry to ensure a clean, clear signal.

WIRING FAULT SAFETY SHUTOFF
This technology will detect a mis-wired wall receptacle or an open-ground by monitoring the voltage between neutral and ground. If an unsafe condition exists, the MIP-20LT will disconnect the power from the connected equipment.

CAT5E ETHERNET LAN PROTECTION
RJ-45 jacks are available to protect one Ethernet 10/100/1000BASE-T network connection (all pins protected).

Features

  • AVM (Automatic Voltage Monitoring) – Protects equipment against prolonged over/ under voltages by disconnecting the power and reconnecting it when safe power returns.
  • Separate protection circuits for 10/100/1000 BaseT Ethernet and telephone.
  • CAT5e LAN Protection In/Out RJ-45 bi-directional connectors
  • Unsafe Power Indicator light
  • Line Fault Indicator light
  • Ground OK Indicator light
  • Power/Filtration OK Indicator light
  • Three-stage, GFCI Compatible filter circuit provides high levels of Normal and Common mode EMI/RFI noise filtration.
  • Surge Protection – Exclusive Protect or Disconnect™ circuitry. In the event of a catastrophic surge such as lightning, it completely disconnects AC power to connected equipment
  • Eight foot power cord
  • Two rubber strips running the length of the product provide a non-slip grip and prevent marring surface
  • Telephone Protection RJ-11 In/Out connectors (2 telco cables included)
  • Two Always-on AC outlets
  • Includes security lock to prevent theft
  • 20 Amp AC configured receptacles
View AllClose

Specifications

General

  • Family Power Conditioners
  • Line Voltage 120 (Volts)
  • Number of Outlets 2
  • Outlet Descriptions Both outlets filtered and surge protected
  • Compliance UL 1283
  • USB Charging N/A
  • Low Voltage Trigger N/A
  • AC Power Cord 8 ft. captive cord
  • Dimensions 10.25″ W x 4.75″ D x 2.5″ H
  • Weight 4.5 lbs

AC Protection

  • AC Protection Technology
    • Protect or Disconnect
    • Automatic Voltage Monitoring
    • L-N, L-G, N-G Protection Modes
    • Thermal Fusing
  • Undervoltage Shutoff 86 VAC ± 6 VAC
  • Over-Voltage Shutoff 138 VAC ± 8 VAC
  • Maximum Current Rating 15 (Amps)
  • Initial Clamping Level 200V Peak

Filtration

  • Filtration Technology RFI/EMI Filtration
  • Filtration Rating 65 dB @ 100KHz – 1 MHz
  • Signal Line Protection
    • 1 LAN
    • 1 Tel

Shipping Info

  • Length 8.8 (Inches)
  • Width 3.4 (Inches)
  • Height 13.2 (Inches)
  • Weight 4.7 (Lbs)

 

  • UPC 050616008686
View AllClose

0 Reviews

View AllClose