Focal Professional Shape 40 - 4" Powered Monitoring Speaker

(No reviews yet) Write a Review
SKU:
FOPRO-SHAPE40
UPC:
191561824010
Weight:
16.10 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours.
  • Focal Professional Shape 40 - 4" Powered Monitoring Speaker
  • Focal Professional Shape 40 - 4" Powered Monitoring Speaker
  • Focal Professional Shape 40 - 4" Powered Monitoring Speaker
  • Focal Professional Shape 40 - 4" Powered Monitoring Speaker
  • Focal Professional Shape 40 - 4" Powered Monitoring Speaker
  • Focal Professional Shape 40 - 4" Powered Monitoring Speaker
  • Focal Professional Shape 40 - 4" Powered Monitoring Speaker
  • Focal Professional Shape 40 - 4" Powered Monitoring Speaker
  • Focal Professional Shape 40 - 4" Powered Monitoring Speaker
$549.00

Description

THE COMPACT SOLUTION

Shape 40 is the most compact studio monitor in the Focal Professional line, and the perfect solution for nearfield monitoring. These monitors can be used from 23″ away (60cm), and they have astonishingly extended low end frequency response. Whether you have a room of less than 107ft2 (10m2), or an installation where compactness is paramount, Shape 40 is the perfect solution.

The three monitors are all made in France and integrate five innovations to maximise acoustic transparency. Designed to meet the needs of nearfield monitoring, Shape monitors combine an ingenuous design and numerous settings optimised for the acoustics of small listening rooms.

These innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image. The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalisation of these essential registers much easier. Finally, the new tweeter is what’s at the source of the very high definition. It efficiently reveals any hissing, and it’s also very precise in the very high end.

KEY FEATURES

  • Tweeter with very low directivity for a flexible listening position
  • Designed without a port, but with a double passive radiator, allowing it to be placed near a wall.
  • Numerous settings for optimal integration
  • Accurate control, even in the very high end
  • Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers.
  • Mounting mechanisms present on the back and underneath the loudspeaker: for installing on a table stand, a microphone stand, the ceiling or a wall (Mounting accessories not supplied).

FLAX SANDWICH CONE

Made in France but affordable, Flax cones are oriented towards acoustic performance, high-tech and give an original design to the brand’s speaker drivers!

After more than five years of research and development, engineers at Focal reveal in 2013 a new cone made of high-quality flax fibers. F cone are characterised by their natural sound, with low coloration, their richness of reproduction in the midrange register and their tighter bass.

THE UNIQUE QUALITIES OF FLAX

F cones are made of high-quality flax fibers core enclosed by two thin layers of glass fiber. They satisfy the key criteria of a high performance diaphragm : high internal damping, high velocity of sound and high flexural rigidity.

  • Rigidity
    • All these criteria cannot be met by a mono-material cone. Sandwich technology greatly influences the neutrality of the sound produced by the cone, something, which has always been Focal’s hallmark. The expertise gained from the sandwich technology of the Utopia and K2 Power ranges enabled Focal to develop a revolutionary flax-fiber cone conciliating the 3 criteria.
  • Lightness
    • Flax is twice as light as fiberglass, because the fiber is hollow. It also has very low elasticity which makes it ideal to increase the flexural rigidity of a sandwich structure. Moreover, it can be obtained in non-woven bundles of considerable diameter and it can therefore produce the thickness required for a sandwich.
  • Internal damping
    • Composite materials have properties suitable for applications where both rigidity and low mass are required. However, their disadvantage is that they lack damping, which leads to very poor control of vibrations. Recent developments in this field combining composites and natural fibers have brought unexpected opportunities. Flax fiber has an excellent internal damping of the same order of magnitude as the glass or Kevlar fibers or aluminum.

MADE IN FRANCE AND AFFORDABLE

Flax cones are designed and manufactured in France, from french flax fiber. France is the main cultivator in Europe of fiber flax, principally in Flanders, Picardy, Normandy and the Pas-de-Calais region. French flax is considered the best in the world.

Synthetic fibers or foams originating from petrochemical resources are subject to inflation linked to the sharp rise in crude oil prices. Organic or ecological textiles, like flax, are thus becoming more and more pricecompetitive.
Because the “W” or "K2" sandwich have to be manufactured by hand, their range of application remains limited for reasons of cost. The industrial process developed to manufacture the "F" cones bring it within reach of very pricecompetitive product ranges

STABILISING THE MAGNETIC FIELD

After having pushed back the limits in electromagnetic technology, our teams discovered the fact that beyond the magnetic field intensity and its homogeneity within the gap, there was a dynamic aspect we had no control over.
The magnetic field is not stable because it is modulated by three factors:
- the movement of the voice coil (Lenz's law)
- the current passing through it (Foucault current)
- the frequency

Consequently, the voice coil, and all the moving part including the cone, is in the magnetic field which becomes too variable, and this leads to loss of precision.

NEUTRAL INDUCTANCE CIRCUIT TECHNOLOGY

After three years of research and the development of simulation software which makes it possible to visualise these complex interactions, Focal engineers created an incredibly stable magnetic circuit for the Sopra line..
The solution, NIC technology, lies in a Faraday ring whose dimensions, materials and positioning were optimised to make the magnetic field no longer affected by the position of the voice coil, by the amperage or the frequency of the current passing through it.

This is a sign of very high definition. 

TMD - TUNED MASS DAMPER

  • THE OBSESSION WITH THE MIDRANGE

The midrange register is no doubt the most complicated to control in a sound system. On one hand, there must be a smooth transition with the bass. On the other hand, it must be tuned to the tweeter in terms of dispersion and acceleration. This determines the homogeneity of the timbre and spatialisation.

For the past 20 years, we have been working on mastering the "break up" (the frequency at which the cone becomes deformed, leading to distortion) of our 3rd generation "W" cones and on drastically reducing the resonance of the tweeter with the IAL 2. Today, thanks to the power of finite element analysis, our teams have developed simulation software to visualise the dynamic behaviour of the suspension which connects the cone to the basket, thus revealing the performance issues requiring attention.

  • TUNED MASS DAMPER

Following the discovering of these issues, we had to conceive the equipment to solve them. The solutions already known for increasing the damping properties of the suspension all result in an increase of the mass which consequently alters definition. The answer came from a technology used in earthquake-resistant skyscrapers and which is also used for the suspension on racing cars! This technology is called a "Tuned Mass Damper": an additional mass oscillate in opposition to the resonance frequency to control it.

Applied to the speaker driver, the solution consists in simply two tubular rings on the suspension whose dimensions and position have been judiciously determined. They form our Tuned Mass Damper (TMD) and they stabilise the dynamic behaviour of the surround according to resonance, thus avoiding deformation of the cone without afflicting the dynamics. This innovation is patented.

FocalCare provides peace of mind instead of downtime.

For a fraction of the cost of your monitors, this extended warranty gets you back on your feet quickly and hassle-free, guaranteed!

You may find it HERE.

FOR FIVE YEARS, YOU ARE ENTITLED TO:

  • Free overnight replacement parts
    • Well get you the parts and instructions that you need to perform easy repairs in the field within one working day.
  • Loaners
    • Should your monitor require the attention or our expert technicians, we will provide you with a temporary replacement to keep you running, as well as a priority email address for questions and assistance.
  • Parts & Labor
    • All the work we perform on your monitors is covered by FocalCare. You shouldn’t have to pay to be out of work!
  • Purchase any time
    • You can purchase FocalCare at any time throughout the standard warranty period.
View AllClose

Specifications

System: SHAPE 40

Frequency response (+/-3dB): 60Hz - 35kHz
Maximum SPL (musical signal): 102dB SPL (peak @ 1m)

Electronic section

Inputs/ Impedance
Type XLR: balanced 10kOhms
Connectors RCA: unbalanced 10kOhms with sensitivity compensation

Midrange and low frequency amplifier: 25W, class AB

High frequency amplifier: 25W, class AB

Automatic standby

Standby on: After approximately 30 minutes with no signal
Standby off: Signal detection > 3 mV

Electrical supply
Voltages: 220-240V (T500mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse)
Connection: IEC plug and detachable power cord

Settings
High pass filter: Adjustable Full range / 80Hz
Bass: (0 - 250Hz) Adjustable, +/-6dB
Midrange/bass: (160Hz, Q=1) Adjustable, +/-3dB

Settings
High: (4.5 - 35kHz) Adjustable, +/-3dB
Power: On/Power Off On/off switch on rear panel

Standby consumption: < 0.5W
Displays and controls: LED for power on/off and standby

Transducers

Woofer: 4" (10cm) Flax Cone
Tweeter: 1" (25mm) 'M' profile Aluminum-Magnesium

Cabinet

Construction: 0.5" (12mm) MDF
Finish: Vinyl, real walnut and black painting
Dimensions with four rubber feet(HxWxD): 10.1 x 6.3 x 7.9" (257 x 161 x 200mm)
Weight: 16.1lb (5kg)

View AllClose

0 Reviews

View AllClose