Earthworks SR25 25kHz multi-use cardioid condenser microphone

(No reviews yet) Write a Review
SKU:
SR25
UPC:
827517160016
Weight:
2.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours.
  • SR25 25kHz multi-purpose cardioid condenser microphone
  • SR25 25kHz multi-purpose cardioid condenser microphone, B
  • SR25mp 25kHz multi-purpose cardioid condenser microphone – matched pair (mic clips included)
  • SR25mp 25kHz multi-purpose cardioid condenser microphone – matched pair Box
$619.00

Description

Cardioid Microphone - 50Hz to 25kHz (mic clip included)

Earthworks cardioid microphones are unlike all the rest, as they have patented near-perfect cardioid patterns. The sound across the entire front hemisphere is remarkably uniform and is flatter at 90 degrees than most microphones are on-axis. This results in uncolored off-axis rejection for recording and greater gain before feedback for live sound. They effortlessly handle up to 145dB SPL while simultaneously revealing subtle details that other microphones mask. All SR models are a superb value and will provide excellent results for both live performance and recording applications. The SR25 was specifically designed for drums and is also ideal for a wide variety of other instruments. The SR25 is an integral part of our DK25/L DrumKit™ System.

  • Extended frequency response to 25kHz
  • Multi-purpose cardioid microphone
  • More gain before feedback than other microphones
  • Less leakage
  • Textbook perfect cardioid polar pattern with natural on- and off-axis performance
  • Provides excellent results for both live performance and recording applications
  • Extreme accuracy in the time domain for faithful reproduction and no smearing or distortion
  • Transparent sound quality
  • Shorter diaphragm settling time to prevent quieter attacks from being blurred by earlier louder attacks
View AllClose

Specifications

Frequency Response: 50Hz – 25kHz ±2dB at 6 inches (15cm)
Polar Pattern: Cardioid
Sensitivity: 10mV/Pa (-40dBV/Pa)
Power Requirements: 48V Phantom, 10mA
Max Acoustic Input: 145dB SPL
Output: XLR (pin 2+)
Output Impedance: 65Ω balanced (between pins 2 & 3)
Min Output Load: 600Ω between pins 2 & 3
Noise: 20dB SPL equivalent (A weighted)
Dimensions L x D: 165mm x x 22mm (6.5 x .860 inches)
Weight: .35 lb (160g)

View AllClose

0 Reviews

View AllClose

Videos Hide Videos Show Videos