Description
The ATS1, ATS1LX and ATS1LP are the industry’s only programmable, shock absorbent table stands with an LED indicator that does not require external power supplies, eliminating the added expense and complication associated with installation and wiring. The LED indicator and audio switching circuitry operate on the same phantom power source supplied to the microphone. The result is simplified installation and reliable operation. The base has programmable functions that are changed with a simple, intuitive dip switch which can be set to operate in Toggle On, Toggle Off, Momentary Talk and Momentary Mute modes. Also supplied within the base is a Low Cut Filter offering additional protection from bass frequencies that may cause rumble or hum.
The ATS1LX and ATS1LP can be further programmed to operate seamlessly with automated teleconferencing and switch systems in external logic control mode. The ATS is manufactured with a precision die cast zinc alloy base, durable black E-coat finish, LED indicators and a noise free mechanical switch.
Features
Heavy duty die cast base provides stability
Shock mount design limits touch noise and vibration
Four programmable talk-mute functions
Local remote control function settings
Seamless integration with automated mixers (ATS1LX & ATS1LP)
Designed, assembled & tested in the USA
1 year warranty
MODEL VARIATIONS
ATS10 - Table stand with latching on/off switch
ATS1 - Heavy-duty shock absorbent table stand with XLR connector, programmable switch (on/off, talk/mute) and choice of two connector versions:
- ATS1LP - 5-pin terminal connector located inside the base
- ATS1LX - 5-pin XLR output connector located at the back of the base
APPLICATIONS
- Podium
- Lectern
- Video conferences
- Classrooms
- Courtrooms
- Boardrooms
What's In The Box
1 x ATS1 Table Stand
Specifications
ATS10
- Mic Input Connector: 3-pin XLRf
- Base Output Connector: 3-pin XLRm
- Switch: Latching on/off
- Off (mute) attenuation: 45dB minimum
- Power Requirements: 11-52 V phantom DC 2mA typical
- Finish: Matte Black
- Length: 160 mm / 6.9 in
- Width: 124 mm / 5.9 in
- Height: 45 mm / 1.8 in
- Weight: 1.4 kg / 3 lbs
ATS1
- Mic Input Connector: 3-pin XLRf
- Base Output Connector: 3-pin XLRm
- Switch: Programmable on/off, talk/mute
- Off (mute) attenuation: 45dB minimum
- Power Requirements: 36-52 V phantom DC 2mA typical
- Finish: Matte Black
- Length: 160 mm / 6.9 in
- Width: 124 mm / 5.9 in
- Height: 45 mm / 1.8 in
- Weight: 1.4 kg / 3 lbs
ATS1LP
- Mic Input Connector: 3-pin XLRf
- Base Output Connector: 5-pin Terminal Block
- Switch: Programmable with remote capabilities
- Off (mute) attenuation: 45dB minimum
- Power Requirements: 36-52 V phantom DC 2mA typical
- Finish: Matte Black
- Length: 160 mm / 6.9 in
- Width: 124 mm / 5.9 in
- Height: 45 mm / 1.8 in
- Weight: 1.4 kg / 3 lbs
- Closure I/O voltage: -0.5 to 30 V
- Closure through current: 200 mA
- On resistance: >10 ohms
- 1/O leakage current: 1uA
- LED input: Active when low (0.4 V DC) TTL compatible
ATS1LX
- Mic Input Connector: 3-pin XLRf
- Base Output Connector: 5-pin XLRm
- Switch: Programmable with remote capabilities
- Off (mute) attenuation: 45dB minimum
- Power Requirements: 36-52 V phantom DC 2mA typical
- Finish: Matte Black
- Length: 160 mm / 6.9 in
- Width: 124 mm / 5.9 in
- Height: 45 mm / 1.8 in
- Weight: 1.4 kg / 3 lbs
- Closure I/O voltage: -0.5 to 30 V
- Closure through current: 200 mA
- On resistance: >10 ohms
- 1/O leakage current: 1uA
- LED input: Active when low (0.4 V DC) TTL compatible
