Description
A combination system that allows for the flexibility of using either the OM2 handheld transmitter or the bodypack system with the ADX10 cardioid lavalier microphone. This package is designed for rental companies, hotels, presentation events, education and applications where only one transmitter would be required at a time. (Please note: it is not possible use both transmitters simultaneously-see the AP42 C210, a combo pack where both transmitters can be used at the same time.)
Available Frequency Bands
- A = 522 MHz - 554 MHz
- B = 554 MHz - 586 MHz
Features
R41 Diversity Receiver
- 32 MHz Wide spectrum receiver
- 106 Pre-coordinated frequencies for quick, easy and reliable set up
- One-touch auto scan searches for clear channel
- One-touch sync links transmitter to receiver via infrared beam
H60 OM2 Handheld Transmitter
- 64 MHz Wide spectrum transmitter with OM2 dynamic capsule
- Durable metal housing
- 14 Hour run time - AA batteries
B60 L10 Bodypack Transmitter
- 64 MHz Wide spectrum transmitter with ADX10 lavalier microphone
- Durable metal housing
- 14 Hour run time - AA batteries
What's In The Box
- 1 x R41 32 MHz Diversity Receiver
- 1 x H60 Handheld Transmitter with OM2 Capsule Module
- 1 x B60 Bodypack Transmitter with ADX10 Lavalier Mic
- 2 x Antennas
- 1 x Audio Cable
- 1 x Clip
- 1 x Pouch
- 2 x AA Batteries
- 1 x Carrying Case
- 1 x Power Supply
- 1 x User Guide
- 1 x Rackmount Hardware
Specifications
R41/R42
Frequency Range: 522 MHz – 554 MHz / 554 MHz - 586 MHz
Bandwidth: 32 MHz
Compatible Systems: 16 Compatible system operation
Switchable Frequencies: 106 Preset frequencies
Manual Mode: n/a
Frequency Response: 45 Hz – 18 kHz
Compander System: 2:1
Pilot Tone: 32 kHz
Receiving System: Single tuner, diversity
Signal-to-Noise Ratio: 105 dB at 30 kHz deviation (A-weighted)
Total Harmonic Distortion: ≤.7% (33 kHz deviation at 1 kHz)
Sensitivity: 5 dBμV (S/N 60 dB at 25 kHz deviation, A-weighted)
Audio Output (AF=0):
- Balanced: -12 dBv @ 25 kHz deviation, 600 ohm load
- 1/4": -18 dBv @ 25 kHz deviation, 10 kohm load
Output Connectors: 1/4", XLR
Audio Level Adjust:
- Balanced: -12 to +9 dBu
- Line: -24 to +4 dBu (adjustable in 3 dB-steps)
Range: 300', (91 M)
Power Supply: 100 - 240V / 50 - 60 Hz, 12V DC, 1A
Dimensions:
- 205 mm (W) x 206 mm (D) x 44 mm (H)
- 406 mm (W) x 209 mm (D) x 44 mm (H) (R42)
Net Weight:
- 1.92 lbs. / 870 g
- 4.4 lbs. / 2.0 kg (R42)
B60
RF Power Output: 10 mW, 40 mW
Frequency Bandwidth: 64 MHz
Gain Controls: 0 db, -6 dB, -12 dB
Input Connector: 3 pin mini-XLR
Batteries Included: 2 AA 1.5 V
Current Consumption: 110 mA typical
Battery Life: 14 hours
Input Impedance:
- Mic: 10 kohm,
- Line: 1 Mohm
Max Sound Pressure Level: 128 dB to140 dB (depending on mic)
Dimensions: 67 mm (W) x 90 mm (L) x 17 mm (D)
2.6" (W) x 3.5" (L) x .67" (D)
Net Weight: 3.0 oz / 85 g (without battery)
ADX10
Transducer Type: Pre-Polarized Condenser
Frequency Response: 50 Hz - 18 kHz
Polar Pattern: Cardioid
Output Impedance: 800 ohms
Sensitivity: 5 mV / Pa @ 1k
Equivalent Noise Level: <29 dB (A-weighted)
Signal to Noise Ratio: >65 dB
Maximum SPL: ≥120 dB
Power Requirements: 9-52 V phantom
Connector: Shielded 3’ terminating to a miniature 3 pin Female XLR connector
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials / Finish: Machined Brass / Black Finish
Weight: 21 g / 0.74 oz
Length: 25 mm / .98 in
H60/OM2
Type: Dynamic
Polar Pattern: Hypercardioid
Frequency Response: 50Hz - 16kHz
Impedance: 290 ohms
Sensitivity: 1.6 mV / Pa @ 1k
