Audix AP41 FLUTE Wireless System - R41 Receiver, B60 & ADX10FLP Mic

(No reviews yet) Write a Review
Weight:
6.30 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours.
  • Audix AP41 FLUTE Wireless System - R41 Receiver, B60 & ADX10FLP Mic
  • Audix AP41 FLUTE Wireless System - R41 Receiver, B60 & ADX10FLP Mic
  • Audix AP41 FLUTE Wireless System - R41 Receiver, B60 & ADX10FLP Mic
  • Audix AP41 FLUTE Wireless System - R41 Receiver, B60 & ADX10FLP Mic
$719.00

Description

A professional diversity wireless system featuring the ADX10FL miniaturized cardioid condenser for standard-sized flutes.

The ADX10FL reproduces the natural tone and percussive nature of the flute with detail and accuracy. The tight pickup pattern of the mic helps to isolate the flute from the rest of the instruments on stage.

Specifically designed for use with a standard-sized flute, the ADX10FL includes an integrated clip that attaches to the headstock of the flute.

Available Frequency Bands

A = 522 MHz - 554 MHz
B = 554 MHz - 586 MHz

Features

R41 Diversity Receiver

  • 32 MHz Wide spectrum receiver
  • 106 Pre-coordinated frequencies for quick, easy and reliable set up
  • One-touch auto scan searches for clear channel
  • One-touch sync links transmitter to receiver via infrared beam

B60 ADX10FLP Bodypack Transmitter

  • 64 MHz Wide spectrum transmitter with ADX10FLP condenser microphone and mount
  • Durable metal housing
  • 14 Hour run time - AA batteries

What's In The Box

  • 1 x R41 32 MHz Diversity Receiver
  • 1 x B60 Bodypack Transmitter with ADX10FLP Condenser Microphone and Mount
  • 2 x Antennas
  • 1 x Audio Cable
  • 2 x AA Batteries
  • 1 x Carrying Case
  • 1 x Power Supply
  • 1 x User Guide
  • 1 x Rackmount Hardware
View AllClose

Specifications

R41/R42

Frequency Range: 522 MHz – 554 MHz / 554 MHz - 586 MHz
Bandwidth: 32 MHz
Compatible Systems: 16 Compatible system operation
Switchable Frequencies: 106 Preset frequencies
Manual Mode: n/a
Frequency Response: 45 Hz – 18 kHz
Compander System: 2:1
Pilot Tone: 32 kHz
Receiving System: Single tuner, diversity
Signal-to-Noise Ratio: 105 dB at 30 kHz deviation (A-weighted)
Total Harmonic Distortion: ≤.7% (33 kHz deviation at 1 kHz)
Sensitivity: 5 dBμV (S/N 60 dB at 25 kHz deviation, A-weighted)
Audio Output (AF=0):

  • Balanced: -12 dBv @ 25 kHz deviation, 600 ohm load
  • 1/4": -18 dBv @ 25 kHz deviation, 10 kohm load

Output Connectors: 1/4", XLR
Audio Level Adjust:

  • Balanced: -12 to +9 dBu
  • Line: -24 to +4 dBu (adjustable in 3 dB-steps)

Range: 300', (91 M)
Power Supply: 100 - 240V / 50 - 60 Hz, 12V DC, 1A
Dimensions:

  • 205 mm (W) x 206 mm (D) x 44 mm (H)
  • 406 mm (W) x 209 mm (D) x 44 mm (H) (R42)

Net Weight:

  • 1.92 lbs. / 870 g 
  • 4.4 lbs. / 2.0 kg (R42)

B60

RF Power Output: 10 mW, 40 mW
Frequency Bandwidth: 64 MHz
Gain Controls: 0 db, -6 dB, -12 dB
Input Connector: 3 pin mini-XLR
Batteries Included: 2 AA 1.5 V
Current Consumption: 110 mA typical
Battery Life: 14 hours
Input Impedance:

  • Mic: 10 kohm,
  • Line: 1 Mohm

Max Sound Pressure Level: 128 dB to140 dB (depending on mic)
Dimensions: 67 mm (W) x 90 mm (L) x 17 mm (D)
2.6" (W) x 3.5" (L) x .67" (D)
Net Weight: 3.0 oz / 85 g (without battery)

ADX10FLP

Transducer Type: Pre-Polarized Condenser
Frequency Response: 50 Hz - 18 kHz
Polar Pattern: Cardioid
Output Impedance: 250 ohms
Sensitivity: 4.5 mV / Pa @ 1k
Equivalent Noise Level: <29 dB (A-weighted)
Signal to Noise Ratio: >65 dB
Maximum SPL: ≥120 dB
Power Requirements: 5-52 V phantom
Connector: Shielded 3’ terminating to a minature 3 pin XLRf
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials / Finish: Machined Brass Capsule / Black Finish
Weight: 110 g / 4 oz
Length: 25 mm / 0.98 in

View AllClose

0 Reviews

View AllClose