Audix ADX20iP Miniature Instrument Mic for Sax & Brass

(No reviews yet) Write a Review
SKU:
ADX20iP
UPC:
687471221389
Weight:
1.50 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • Audix ADX20iP Miniature Instrument Mic for Sax & Brass
  • Audix ADX20iP Miniature Instrument Mic for Sax & Brass
  • Audix ADX20iP Miniature Instrument Mic for Sax & Brass
  • Audix ADX20iP Miniature Instrument Mic for Sax & Brass
$249.00

Description

The ADX20iP is a miniaturized condenser microphone used for professional stage and studio applications. The ADX20iP is known for its clarity, excellent transient response, resistance to feedback, SPL handling and ease of operation. The ADX20iP is primarily used for miking saxophone and other brass instruments. The ADX20iP is characterized with a uniformly controlled cardioid polar pattern. This provides excellent isolation and feedback control on stage as well as natural sound reproduction at very close distances.

With a smooth and accurate response over a frequency range of 40 Hz - 20 kHz, the ADX20iP is lightweight, compact and simple to use. Housed in an aluminum ring and isolated by means of a rubber shock mount system.

The ADX20iP is designed for use with a microphone cable. The ADX20iP operates on phantom voltage of 9-52 Volts and is supplied with a phantom power adapter (APS-911), 6’ integrated mic cable, gooseneck clip (MC- 20i) and carrying pouch.

Features

  • Small, lightweight, low profile
  • Natural, accurate sound reproduction
  • High SPL handling
  • Miniaturized integrated preamp circuitry
  • Easy to use

Applications

  • Saxophone
  • Trombone, trumpet
  • Room ambience, recording
  • Accordian

Supplied Accessories

  • Gooseneck clip with integral shock mount (MC-20i)
  • External foam windscreen (WS-20)
  • Carrying pouch (P1)
  • Phantom Power Supply (APS911)
View AllClose

Specifications

Transducer Type Pre- polarized Condenser
Frequency Response 40 Hz - 20 kHz
Polar Pattern Cardioid
Output Impedance 250 ohms
Sensitivity 5.8 mV/ Pa @ 1k
Signal/Noise Ratio (A-weighted) 65 dB
Equivalent Noise Level (A-weighted) 29 dB
Maximum SPL @ .5% THD 135 dB
Power Requirements 9 - 52 V phantom
Connector Shielded 6’ cable terminating to a miniture 3 pin XLRf
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing / Finish Machined Brass
Gooseneck Flexible Steel
Weight 48 g / 1.7 ounces
Length 29 mm / 1.14 inches

View AllClose

0 Reviews

View AllClose