Audio-Technica System-10 ATW-R1100 Receiver & ATW-T1002 Handheld Transmitter System

(No reviews yet) Write a Review
SKU:
ATW-1102
UPC:
4961310116330
Weight:
3.50 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • Audio-Technica System-10 ATW-R1100 Receiver & ATW-T1002 Handheld Transmitter System
  • Audio-Technica System-10 ATW-R1100 Receiver & ATW-T1002 Handheld Transmitter System
$349.95

Description

The Audio-Technica ATW-1102 contains ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex™ stand clamp.

Audio-Technica’s System 10 is an eight-channel digital wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring stackable, contemporary styling, System 10 is available in handheld, headworn, guitar, lavalier and body-pack configurations and desired configuration can be ordered separately. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

The ATW-R1100 receiver includes a switching power supply that automatically adapts to changes in mains voltage.

The ATW-T1002 handheld transmitter features a unidirectional dynamic microphone element.

Features

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • 2.4 GHz range – completely free from TV interference
  • Three levels of diversity assurance: frequency, time, & space
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and set-up
  • State-of-the-art digital receiver for reliable performance
  • Balanced XLR and unbalanced 1/4” output jacks with level control
View AllClose

Specifications

OVERALL SYSTEM SPECIFICATIONS

Operating Frequencies 2.4 GHz ISM band
Dynamic Range  >109 dB (A-weighted), typical
Total Harmonic Distortion  <0.05% typical
Operating Range  30 m (100') typical, Open range environment with no interfering signals
Operating Temperature Range 0° C to +40° C (32° F to 104° F), Battery performance may be reduced at very low temperatures
Frequency Response 20 Hz to 20 kHz, Depending on microphone type

ATW-R1100 RECEIVER

Receiving System Diversity (frequency/time/space)
Maximum Output Level XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
Dimensions 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
Net Weight 290 grams (10.2 oz)
Accessory Included Power supply

ATW-T1002 HANDHELD TRANSMITTER

RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Batteries Two 1.5V AA, not included
Battery Life >7 hours (alkaline), Depending on battery type and use pattern
Dimensions 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Net Weight 280 grams (9.9 oz), without batteries
Accessory Included AT8456a Quiet-Flex™ stand clamp

View AllClose

0 Reviews

View AllClose