Audio-Technica PRO37 Small-Diaphragm Condenser Microphone

(No reviews yet) Write a Review
SKU:
PRO37
UPC:
42005134304
Weight:
1.50 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • Audio-Technica PRO37 Small-Diaphragm Condenser Microphone
  • Audio-Technica PRO37 Small-Diaphragm Condenser Microphone
  • Audio-Technica PRO37 Small-Diaphragm Condenser Microphone
$169.00

Description

The PRO 37 has established itself as a versatile solution for studio recording and live performance. With a low-mass element for superb transient response and a low-profile design for optimal mic placement, this mic excels in high-SPL applications. It is ideal for acoustic guitar, overheads, piano and group vocals. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

The PRO 37 is intended for use in professional applications where remote power is available. It requires 11V to 52V DC phantom power, which may be provided by a mixer or console, or by a separate, in-line source such as the Audio-Technica AT8801 single-channel or CP8506 four-channel phantom power supplies.

Features

  • Professional performance for studio recording and live sound reinforcement
  • Low-mass element for superb transient response
  • Excels in high-SPL applications
  • Low-profile design for optimal mic placement
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged design and construction for reliable performance
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
View AllClose

Specifications

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 30-15,000 Hz
OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 141 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 112 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
WEIGHT 1.7 oz (49 g)
DIMENSIONS 3.9" (99.0 mm) long, 0.83" (21.0 mm) maximum body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8159 windscreen; soft protective pouch
AUDIO-TECHNICA CASE STYLE S1

View AllClose

0 Reviews

View AllClose