Description
- Element Fixed?charge back plate, permanently polarized condenser
- Polar Pattern Cardioid
- Frequency Response 270?17,000 Hz (50 cm (1.64')), 60?17,000 Hz (10 cm (0.33'))
- Low Frequency Roll Off 80 Hz, 18 dB/octave (wired only)
- Open Circuit Sensitivity ?42 dB (7.9 mV) (0 dB=1 V/Pa, 1 kHz)
- Impedance 250 ohms (wired only)
- Maximum Input Sound Level 140 dB SPL (1 kHz at 1% THD)
- Noise 28 dB SPL (A?weighted)
- Dynamic Range 112 dB (1 kHz at Max SPL)
- Signal-to-Noise Ratio 66 dB (1 kHz at 1 Pa, A?weighted)
- Phantom Power Requirements 11V?52V DC, 2 mA (wired only)
- Switches Low cut: on/off (wired only)
- Weight 1.6 g (0.06 oz) (Microphone body)
- Cable 1.4 m (4.6')
- Dimensions 22.3 mm (0.88") long, 5.3 mm (0.21") diameter (Microphone body)
- Output Connector Screw-down 4-pin cH-style connector (wired only)
- Accessories Included AT8461a clothing clip base, AT8151a windscreens, case
Specifications
- Element Fixed?charge back plate, permanently polarized condenser
- Polar Pattern Cardioid
- Frequency Response 270?17,000 Hz (50 cm (1.64')), 60?17,000 Hz (10 cm (0.33'))
- Low Frequency Roll Off 80 Hz, 18 dB/octave (wired only)
- Open Circuit Sensitivity ?42 dB (7.9 mV) (0 dB=1 V/Pa, 1 kHz)
- Impedance 250 ohms (wired only)
- Maximum Input Sound Level 140 dB SPL (1 kHz at 1% THD)
- Noise 28 dB SPL (A?weighted)
- Dynamic Range 112 dB (1 kHz at Max SPL)
- Signal-to-Noise Ratio 66 dB (1 kHz at 1 Pa, A?weighted)
- Phantom Power Requirements 11V?52V DC, 2 mA (wired only)
- Switches Low cut: on/off (wired only)
- Weight 1.6 g (0.06 oz) (Microphone body)
- Cable 1.4 m (4.6')
- Dimensions 22.3 mm (0.88") long, 5.3 mm (0.21") diameter (Microphone body)
- Output Connector Screw-down 4-pin cH-style connector (wired only)
- Accessories Included AT8461a clothing clip base, AT8151a windscreens, case
