Audio-Technica ATW-B80WB In-Line RF Boosters

The ATW-B80WB consists of a pair of UHF wideband powered in-line antenna boosters, designed to increase the RF signal strength to compensate for antenna cable loss. When paired with the appropriate UHF antennas the boosters are especially suited for applications where there are long RF cable runs between the antennas and receiver locations.

Engineered for temporary or permanent installations, the boosters are designed to work with the half-wave antennas supplied with 3000 and 6000 series receivers and the
ATW-A49 LPDA antenna. Each booster contains an integral RF amplifier powered by 12V DC provided on the antenna cable by the associated wireless receiver or antenna
distribution system. Power is required for their operation and a power active indicator illuminates when power is applied. Wideband filters on the boosters minimize the
amplification of unwanted RF signals. A gain setting button permits selection of +12 or +6 dB operation, to compensate for cable losses or other operating conditions. Inputs
and outputs are via standard BNC-type connectors. Constructed of metal to minimize the pickup of RF interference, the boosters are a stainless steel finish.

Features

• Compact lightweight in-line design
• Selectable +6 and +12 dB gain
• Power status LED indicator
• Wideband operation (470-990 MHz)
• Bus power via coaxial cable