Description
The PGXD14/BETA98H Instrument Wireless System is part of the PGX-D wireless systems family.
PGX-D Digital Wireless, with state-of-the-art, 24-bit digital audio and trusted Shure microphones, delivers stunning sound and a strong, clean RF signal.
Includes PGXD4 receiver, PGXD1 bodypack transmitter, WB98H/C microphone, power supply, 2 AA batteries, carrying case, and user guide.
Specifications
PGXD1 Bodypack Transmitter
- Audio Input Level
- +10 dBV maximum, at minimum gain setting
- -16 dBV maximum, at maximum gain setting
- Gain Adjustment Range: 26 dB
- Input Impedance: 1 MΩ
- RF Output Power: 10 mW; varies by region
- Pin Assignments
TA4M: - 1: ground (cable shield)
- 2: + 5 V Bias
- 3: audio
- 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
- Dimensions: 108 mm x 64 mm x 19 mm (H x W x D)
- Weight: 128 g (4.5 oz.)(without batteries)
- Housing: Molded polycarbonate case
- Power Requirements: 2 “AA” size alkaline or rechargeable batteries
- Battery Life: up to 10 hours
PGXD4 Wireless Receiver
- Dimensions: 40 mm X 181 mm X 104 mm (H x W x D)
- Weight: 289 g (10.2 oz.)
- Housing: ABS
- Sensitivity: -102 dBm @ 10-5 BER
- Power Requirements: 12–18 V DC @ 150 mA, supplied by external power supply (tip positive)
- Audio LED
- Red: 2 dB below clip
- Amber: 12 dB below clip
- Green: 50 dB below clip
- Audio Output Configuration
- Impedance balanced
- Audio Output Level (1 kHz tone)
- XLR connector: –2.5 dBV (into 3 kΩ load)
- 6.35 mm (1/4”) connector: +10 dBV (into 10 kΩ load)
- Impedance
- XLR: 50 Ω
- 6.35 mm (1/4”): 50 Ω
- Pin Assignments
- XLR: 1=ground, 2=hot, 3=cold
- 6.35 mm (1/4”) TRS: Tip=audio, Ring=no audio,
- Sleeve=ground