Crane Song Trakker 1U Single Channel Compressor Limiter w/ Analog Presets

(No reviews yet) Write a Review
SKU:
TRAKKER
Weight:
14.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours.
  • Crane Song Trakker 1U Single Channel Compressor Limiter w/ Analog Presets
  • Crane Song Trakker 1U Single Channel Compressor Limiter w/ Analog Presets
$2,549.00

Description

TRAKKER
SINGLE CHANNEL DISCRETE
CLASS A COMPRESSOR-LIMITER

TRAKKER is a high quality Single Channel Discrete Class A Compressor-Limiter. It functions either as a musically transparent compressor or as a vintage compressor-limiter with selectable hard or soft knee. It can create distinct new sounds or maximize existing ones. The TRAKKER has adjustable threshold, attack, release, knee shape, and makeup gain controls. In addition to these controls, a function switch allows the selection of transparent operation or vintage operations such as optical, air optical, soft knee, and hard knee - each with four different amplifier/gain control sounds.

The amplifier/gain control sounds are:

  • Transparent
  • Vintage (tube or old style class A)
  • Transparent with VCA artifacts and
  • Vintage with VCA artifacts.

The front panel contains a 22 element VU meter with over load indicator to show gain reduction and allow accurate monitoring of output levels. In the link mode the master unit controls all functions of the slave units except for make-up gain. An additional feature of the TRAKKER is the ability to link up to 8 units for surround mixing.

TRAKKER is a maximum-versatility toolkit for solving real-world recording, broadcast, and sound reinforcement problems with the utmost attention to signal quality. From single channel operation to bus compression, TRAKKER can provide an artistic choice of sounds at the flip of a switch.

View AllClose

Specifications

Input: Floating, balanced. Maximum input is +25 dBm. The connectors are XLR.
Output: Floating, balanced. Maximum output is +25 dBm. The connectors are XLR.
For Input and Output: Pin 2 is Sig + , Pin 3 is Sig – , Pin 1 is GND
Side Chain Connections: Floating, balanced. Connections are made by using a DB-9 Male Connector. This is a loop insert and must be normaled back to the TRAKKER.
Unbalanced Connections: Are made by tieing the SIG – Pin to the GND Pin. If the connection is an input, it is best to tie at the signal source. If the connection is an output, it is best to tie at the TRAKKER XLR connector.
Power: 100, 120, 230,240 volt; 50/60 Hz; 45 watts
MDL 0.4A Fuse for 100V and 120V
MDL 0.25A Fuse for 230V and 240V
Pilot Lamp: # 7335
Shipping Weight: 14 lbs. (6.34 kg)
Depth Behind Panel: 10 inches plus cabling
Panel Height: 1 rack space

View AllClose

0 Reviews

View AllClose