Mic / Line Splitters & Switchers

The SX45 Stereo Two-Way Crossover The SX45 is a unique frequency dividing device for small sound reinforcement applications. The unit features a 12 dB/Octave roll off rate, a frequency dividing range of 50Hz to 2.5kHz, and an external power supply for...

SX21 Tiny Two-Way Crossover The SX21 is a 24dB/Octave two-way frequency crossover intended for sound reinforcement applications. It has a 1/4" input, Low and High frequency 1/4" Outputs, a single variable Crossover Frequency, separate Low and High Output...

SS412 Audio Source Selector The SS412 source selector is a completely passive design with absolutely nothing added to your audio signal path. That means NO power required, NO electronics used and NO distortion will ever be added. The chassis is made from...

SS32 mini route 3 The SS32 is a passive stereo or mono signal switching device designed to route a single signal to three outputs one at a time, or three input signals to a single output. All Contacts are make before break. Features 1/8" stereo and...

MS20c Mic Splitter/Combiner/Isolator The MS20c Splitter / Combiner / Isolator will split a single balanced XLR signal into two isolated signals, combine two balanced XLR signals together into a single, or simply isolate a balanced line for buzz or hum...

Stage Toggle for Condenser Mics  The HotShot 48V is a condenser microphone switcher built for silent operation on stage, allowing an artist to power their vocal mic and reroute it to feed the stage monitoring system for communicating with other band...

Passive Line-Level Splitter The Exo-Pod™ is a passive broadcast splitter than can take a balanced line output from a mixing console and distribute the signal to up to 14 recording devices. It can also be used in conjunction with the Radial mPress...

Passive Line-Level Splitter The Radial LX-3™ is a high-performance balanced line-level splitter designed to send one audio signal to as many as three destinations at once. Features Send one audio signal to three destinations simultaneously Jensen...

Passive Line-Level Splitter & Attenuator The LX-2™ is a passive balanced line-level audio splitter that allows you to easily send an audio signal to two different destinations at once without noise, while also providing the ability to attenuate...

The IsoGtr expands on our circuitry of the IsoDI by adding 3 additional transformer isolated instrument outputs to serve as an isolated signal splitter for sending your guitar or instrument signal to up to 4 amplifiers or effects chains (3...

Designed for high end RCA audio distribution the DA134 is a four channel distribution amplifier. RCA and 1/8” inputs can be sourced from mono or stereo. The DA134 will distribute a mono signal to eight outputs, or a stereo signal to four stereo...

The Radial Catapult is a 4-channel audio snake that lets you send analog or AES digital audio signals over standard Cat 5 or Cat 6 shielded twisted pair cable. This allows stage techs to take advantage of the relatively low cost of this abundantly...