SPL GoldMike Mk2 - Dual Channel Microphone Preamplifier

(No reviews yet) Write a Review
SKU:
SPLGOLDMIKEMK2
UPC:
4260149320100
Weight:
9.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • SPL GoldMike Mk2 - Dual Channel Microphone Preamplifier
  • SPL GoldMike Mk2 - Dual Channel Microphone Preamplifier
$1,899.00

Description

The GoldMikeMK2 is the result of all our experience and knowledge from its successful predecessor and represents an improved, more flexible, and more modern version. We have added technologies that have already proven to provide superior tonal results in other SPL products. For example, the instrument input is designed around a class A impedance converter which premiered in the SPL GainStation. A significant contribution to the success of the predecessor was the hybrid preamplifier concept. It combines transistor and tube preamplifier stages and specifically utilizes their technological and sonic advantages: The efficiency and low noise of a discrete transistor stage is enriched with musical coloration of a tube stage.

The transistor stage is composed of single transistors in a class A design. The circuitry is fully discrete, and each transistor is completely optimized for its specific task. You will not find any IC’s in this preamplifier stage because they cannot be optimized for this specific application to the degree we at SPL aim for. This all new discrete class A transistor stage is a genuine innovation in the entire preamplifier market at this price level.

The degree of tube pre-amplification is no longer the fixed +6 dB value of its predecessor. The GoldMikeMK2 sports the selection of three different tube pre-amplifications: +6 dB remains the standard complemented by +12 dB and +18 dB. This allows creative variety with the tube saturation and limiting effects.

We have also added an extra setting to the popular Flair circuitry to give more flexibility to the presence improvement. Because the GoldMikeMK2 is a dual channel preamplifier, its channel separation is of fundamental importance for the stereo image. Therefore the print-board layout is symmetrically mirrored around the power supply in the center from channel 1 to channel 2. This results in an identical signal flow to supporting a naturally balanced stereo image. Additionally the print-board provides extra-large ground areas maximizing the shielding against crosstalk and interference.

Features

  • Discrete Class A solid stage
  • Tube drive in three different intensity levels
  • Flair presence enhancement in two switchable settings
  • Switching inserts
  • Pre-output limiter stage (extremely fast diode-based operation, perfect for A/D converter protection)
  • VU metering with three different, switchable display ranges
  • Front panel instrument input, separate rear-side microphone and line inputs
  • Phantom power, phase reverse, pad and high-pass filter (50Hz)
View AllClose

Specifications

Frequency response: ‹10Hz bis 90kHz (-3dB)

Input impedance
Microphone, XLR: 2,8kOhm
Line In, TRS: 10kOhm
Instr. In TRS: 1mOhm

Output impedance (XLR and TRS): 50Ohm

THD+N
Input level -30dBu, Gain 30dBu: 0,016 %
Input level -40dBu, Gain 40dBu: 0,017 %
Input level -50dBu, Gain 50dBu: 0,022 %
Input level -60dBu, Gain 60dBu: 0,048 %

Noise (A-weighted, R=40Ohm)
Gain 30dB: -91,2dBu
Gain 40dB: -86,6dBu
Gain 50dB: -78,7dBu
Gain 60dB: -69,3dBu

Dynamic range (Gain 30dB): 110dB
E.I.N.: 128dBu

Max. input level
Microphone, XLR: +7dBu
Microphone, XLR +PAD: +28dBu
Line In, TRS: +23dBu
Instr. In TRS: +7dBu
Instr. In TRS +PAD: +14dBu

Max. output level
Balanced, XLR+ TRS +26,8dBu
Unbalanced, XLR+ TRS +21,5dBu

CMRR
1 KHz, Gain 30dB: ›75dB
10 KHz, Gain 30dB: ›75dB

Power consumption: 25W
Dimensions: W x H x D (mm) 482 x 88 x 210
Weight: 4,1kg

View AllClose

0 Reviews

View AllClose