Description
The Shure A96F transformer connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices. It increases the signal level from the microphone, provides a balanced input, and prevents distortion due to the DC bias voltage typically found in camcorder microphone inputs.
The A96F can be modified for microphones rated at 150 ohms. This modification is only necessary if the output level from the A96F is insufficient for your recording device. It features a female XLR connector on the microphone end and .6 meter (2 ft) cable with 3.5 mm phono plug on the recorder end.
Specifications
Frequency Response 20 to 20,000 Hz ± 2 dB
Impedance
Low impedance: 600 Ω (supplied) or 150 Ω
Medium impedance: 2,500 Ω
DC Resistance
Low impedance: 600 Ω winding: 56 Ω; 150 Ω winding: 28 Ω
Medium impedance: Open Circuit
Voltage Ratio
Low impedance to medium impedance: 600 Ω = +6 dB; 150 Ω = +12 dB
Maximum Recommended Input Levels
Source Impedance
- 150 Ω
- 600 Ω
- 2,500 Ω
Winding Being Driven
- 150 Ω
- 600 Ω
- 2,500 Ω
Maximum Level
- 0.5 V
- 1.0 V
- 2.0 V
Case Full magnetic shield, steel with gray enamel finish
Dimensions 19 mm (3/4 in.) diameter; 89 mm (3 1/2 in.) long
