Loading... Please wait...
  • Radial Engineering Tonebone Regency Pre-Drive & Booster
  • Radial Engineering Tonebone Regency Pre-Drive & Booster - Top View
  • Radial Engineering Tonebone Regency Pre-Drive & Booster - In's & Out's
  • Using the Pre-Drive to add sustain
  • Using the Booster to push the front end
  • Image 6

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Audio circuit type: Class A discrete
Frequency response: Shaped for guitar use
Gain - Boost: Variable from 0dB to +23dB
Gain - Overdrive: Variable from +8dB to +43dB
Noise floor: -73dBu
Maximum input: +10dBu
Total harmonic distortion: <0.01%
Inter-modulation distortion: >0.1% @15dBu Out
Input impedance: 220KΩ
Output impedance - Boost On: 150Ω
Output impedance - Drive On: 1k Ω
Clip level - output: +4dBu

Controls - Boost: Gain
Controls - Overdrive: Level, Tone, Drive
Switches: Boost on/off, Overdrive on/off, Low-mid select
Effects loop: ¼” send and return jacks
LED indicators: Large 3mm OD ultra-bright LEDs

Power: 60mA, 9VDC (center pin negative)
Construction: 14-gauge steel
Finish: Durable powder coat
Size: L:4¼ x W:4 x H: 2⅛
Weight: 1.45lb
Shipping size: L: 6⅜ x W:4⅛ x H:2⅞
Shipping weight: 1.7lb
FCC approval: Complied with section 15 of the FCC Rules
Conditions: For indoor use at temperatures between +5°C and +40°C
Warranty: Radial 3-year, transferable

Vendors Other Products

Radial Engineering Tonebone Regency Pre-Drive & Booster

R800 7013 00
5.00 LBS
Usually ships within 24 hours.
Calculated at checkout

Product Description

Radial Engineering Tonebone Regency Pre-Drive & Booster

  • Unique pre-drive circuit for high gain amps
  • Super-hot +23dB Class-A power booster
  • Pre-Drive and Boost can be combined
  • Built-in effects loop activates with booster

The Regency™ is a new type of pedal designed specifically to pre-emphasize the gain stage of today's high gain amps. It features two circuits that may be used independently, or combined together to add punch, harmonics and sustain without losing articulation or oversaturating the guitar signal.

The Pre-Drive can be thought of as a pre-distortion overdrive that can be set with just enough grit to add sustain, yet with enough gain to push the front end of the amp for more natural sustain and harmonics. It features an adjustable drive to set the amount of distortion, a tone control for tone shaping plus a drive level control to set the output volume. A 3-position Low-Mid switch rounds out the sonic structure to better focus bottom end to match your amp and guitar.

The Booster is a super-hot, 100% discrete, pure Class-A power booster that delivers up to +23dB of clean gain. This can be used for soloing or hitting the front end of a smaller amp to cause it to break up prematurely. To add even more excitement to the performance, a built-in effects-loop allows a series of pedals such as a delay or chorus to be added to the signal chain when the boost footswitch is engaged. This speeds the transition from rhythm to lead when soloing, delivering a more efficient and professional performance on stage.

The Pre-Drive and Booster are each activated with their own footswitch and both can be combined to push your amp to extremes. The actual switching is done using gold-contact sealed relays for true-bypass performance.

The Regency… a new type of pedal that is fit for a king!