ProDAD Mercalli V4 Suite for EDIUS ESD *EDIUS 7/7.5/8 ONLY*

(No reviews yet) Write a Review
SKU:
PDAD/Mercalli V4 Suite for EDIUS
Availability:
Usually ships within 24 hours.
$284.05

Description

ProDAD Mercalli V4 Suite for EDIUS - Includes Mercalli V4 Stabilizr plugin, cmosFIXR plugin, Mercalli V4 SAL+ standalone. * EDIUS 7/7.5/8 ONLY *

The new Mercalli V4 Plug-ins for EDIUS!

  • Highlights of the new Plug-ins and Improvements over Mercalli Version V2:
  • Absolutely fully automatic stabilisation, easier to use on multiple clips
  • Interactive overlay charts for uncovering "problem zones" in the video as an aid for manual adjustment as part of maximum video optimisation
  • Extremely quicker video analysis of the stabilisation (although significantly better than in V2)
  • Image sharpness in stabilised results significantly higher due to fewer zoom-in requirements and new algorithms, even and especially with interlace material
  • Fisheye effect videos no longer interfere with the stabilisation quality
  • Zoom-in requirements significantly reduced for stabilisation, thus more resolution and wide angle in stabilised results
  • Fade effect at the beginning and end of stabilisation areas in order to quickly and easily stabilise smaller areas of longer clips (without new section)
  • With a single click, all clips that were trimmed can be fully automatically stabilised once again afterwards with Mercalli. (Previously, this had to be started individually for each clip manually)
  • Now with 10-bit support
  • Now supports 10-bit, 4K and CinemaScope
  • Stabilisation now for stereoscopic 3D material
  • Optimised multi-core and multi-threading for maximum computing speed
  • Incl. GPU support as an additional computational accelerator (according to existing graphics card)

Examples WITHOUT stabilization, CMOS correction only:

Sound familiar?

You’ve stabilized your video but the following issues remain:

  • Vibration jitter
  • Shrinkage
  • Image compression
  • Shaking
  • Wobble & jello

The reason for this is that almost all action cameras, DSLR cameras and many pro cams rely on CMOS imaging sensors. When cameras with CMOS sensors are subjected to shaking or vibrations the recorded images are often full of CMOS distortions like wobble, jello, vibration jitter, and skew.

These issues are a real challenge for typical video stabilizers, which can smooth bumps and shakes, but can’t do anything for CMOS distortions. Only Mercalli V4 is able to correct BOTH shakes & CMOS distortions – and its automatic!

Have a look at the video below, you will see what ONLY correcting CMOS distortions in the video looks like. Notice there is virtually no zoom-in.

Examples for CMOS-Correction PLUS stabilization:

First remove CMOS distortions and look forward to better overall video quality.

Jitter and wobble-free video is a critical first-step before applying any stabilization to further correct undesirable camera movements!

Forget worrying about vibration, shakes, or complicated mounting devices. Don’t get frustrated with expensive or heavy gyros or gimbals, which are not able to remove CMOS distortions and shorten battery life (if you’re shooting from an aerial plane/copter) due to added weight. Forget incam stabilization, which only decreases the video resolution, often does a sub-optimal job of stabilizing, and can’t correct CMOS distortions.

Simply mount the camera wherever you want on whatever you want and focus on getting that fantastic shot – leave the stabilizing and distortion corrections to Mercalli V4

Treat yourself to the best stabilization available.

Features at a glance / Version comparison

 

Mercalli V4 Plugin Suite for EDIUS  

Mercalli V2 Plugins

Improvements    
Fully automatic stabilisation ok -
Manual customisation options ok Limited
Overlay information ok -
Analysis speed Optimized Limited
Image sharpness result Optimized Limited
Interlace processing ok Limited
Fisheye material processing ok -
Zoom-in requirement for stabilisation Low High
Part stabilisation of clips ok -
One-click multi-clip analysis ok -
10-bit support ok -
Stereoscopic 3D ok -
Multi-core + multi-threading ok -
GPU support (if present) ok -
Automatic CMOS correction    
Skew ok Limited
Vibration ok --
Wobble/Jello ok --
Advanced CMOS Tools ok --
Stabilisierung    
3D (X, Y, Z axis stabilization) Enhanced ok
Dynamic Zoom-In ok --
SmartBorder Options Enhanced ok
Stabilize warped (fisheye) image Enhanced Limited
Profile    
Universal Camera ok ok
Glide Camera ok ok
Rock-steady Camera ok ok
Action Cam ok -
Forensic Camera ok -
Action Camera Optics Profile ok -
Editing Tools    
Clip Trimming ok -
Clip Rotation ok -
Storyboard clip merging ok -
Full resolution preview ok -
Video de-noising & sharpening ok -
GPU Support ok -
Batch analysis of clips in media bin Enhanced -
Easy storyboard function ok -
Export formats    
H.264/AVC - MP4 ok -
H.264/AVC - MOV ok -
H.265/HEVC - MOV ok -
MJPEG - MOV ok -
Apple ProRes - MOV ok -
Apple Lossless Audio Codec (ALAC) ok -
AAC ok ok
AC-3 ok -
PCM ok -
Import Formats    
Container MP4, QuickTime, MFX, MKV -
Codec AVC/264, HEVC/265 -
File Types .mov; .mpg; .mpeg; .mp4; .mts;
.m2t; .m2ts; .m2v; .avi; .wmv;
.mxf; .vob; .vcd; .3gp; .mkv;
.jpg; .tif; .png; .tga; .gif;
.bmp; .dpx
-
System Requirements    
NLE GV EDIUS 7.0, 8.0

GV EDIUS NEO 2.x, 3.x
GV EDIUS 5.x, 6.0, 6.5, 7.0

 

Windows 64/32 bit: Vista, Win7, Win8, Win8.1, Win10,

4GB RAM, graphics card with 512MB u.Shader 3.0

Windows 64 Bit/ 32 Bit: Vista, Win7, Win8,
Win8.1, Win10, 2GB-memory, recommended:
i7-CPU, 6 GB memory,
Editing application required

 

Recommended for real-time application:

  • Windows 64/32 bit: i7 CPU with 3 GHz and 8 cores,
  • 12GB main memory,
  • For Stabilizr: Good graphics card with 512MB,
  • Shader 3.0 with fast bus
  • For CmosFixr: Very good graphics card with 1GB
  • Shader 3.0 with super-fast bus
 
View AllClose

0 Reviews

View AllClose