Countryman Type 10S Stereo Direct Box

(No reviews yet) Write a Review
SKU:
DT10S
Availability:
Usually ships within 24 hours
Weight:
2.00 LBS
Shipping:
Calculated at Checkout
On Sale
  • Countryman Type 10S Stereo Direct Box
  • Countryman Type 10S Stereo Direct Box
  • Countryman Type 10S Stereo Direct Box
  • Countryman Type 10S Stereo Direct Box
Now: $339.00
Was: $399.00

Description

The Type 10S is a two-channel version of the Type 10 direct box, delivering industry-leading technical performance with new features to meet the unique needs of stereo and two-channel users.

Outstanding Performance

The Type 10S achieves the highest SNR, lowest phase deviation, and lowest distortion of any DI. Some boxes achieve low distortion over a narrow range of frequencies and levels, but end up coloring the low frequencies and distorting loud signals. The Type 10S maintains exceptionally low THD and IMD across the entire audio band, and for a wide range of input voltages, rendering your sound with extremely high fidelity.

Indestructable

Like the Type 85, the Type 10S is armored inside and out, with a molded core wrapped in an extra thick architectural aluminium housing. The switches and connectors are fully recessed. The electronics are just as tough—the Type 10S shrugs off static spikes and will survive with the input connected directly to 110 V or 220 V line voltage.

 

View AllClose

Specifications

Frequency Response:     10 Hz to 50 kHz (+/- 1 dB)
Deviation From Linear Phase:    30 Hz: +/- 2°; 100 Hz to 20 kHz: 0°
Noise (Shorted Input, BW=22 HZ TO 20 KHZ):     1.8 uVrms (-115 dBVrms)
Distortion (1 VPP in, RL= 1.2 KOHM Through 200 FEET of XLR cable):     THD (1 kHz): < 0.001%; THD (30 Hz to 20 kHz): < 0.005%; IMD (10 kHz/60 Hz, 4:1): < 0.002%
Cross-Talk Rejection:     > 105 dB (20 Hz to 20 kHz)
Power Options:     48 V Phantom (1.5 mA); 9 V Battery (4.8 mA, 130 hours on a typical alkaline)
Input Protection:     220 Vrms and 20,000 V static discharges
Transformer Isolation Voltage:     > 500 V from instrument ground to XLR output pin 1
Padding Settings:     0 dB; -15 dB; -30 dB
RF Filtering:     Input: 1.5 MHz low-pass filter; Output: 60 kHz low-pass filter
Maximum Input Level (1% THD):     0 dB pad: 5 Vpp; -15 dB pad: 28 Vpp; -30 dB pad: 158 Vpp
Input Resistance:     0 dB pad: 10 MOhm; -15, -30 dB pad: 10 kOhm; RCA and 1/8" inputs: 20 kOhms
Input Capacitance:     240 pF (equal to 3 ft of low-capacitance guitar cable)
Output Polarity:     Pin 2 positive
Dimensions:     6.25" x 4" x 2" (159 mm x 102 mm x 51 mm)
Weight:     31.2 oz (0.88 kg)

View AllClose

0 Reviews

View AllClose