Cascade Microphones FAT HEAD Bare Essentials Short Ribbon Microphone

(No reviews yet) Write a Review
SKU:
96-BE-A
Availability:
Usually ships in 24 hours
Weight:
4.50 LBS
Shipping:
Calculated at Checkout
  • Cascade Microphones FAT HEAD Bare Essentials Short Ribbon Microphone
  • Cascade Microphones FAT HEAD Bare Essentials Short Ribbon Microphone
  • Cascade Microphones FAT HEAD Bare Essentials Short Ribbon Microphone
  • Cascade Microphones FAT HEAD Bare Essentials Short Ribbon Microphone
  • Cascade Microphones FAT HEAD Bare Essentials Short Ribbon Microphone
  • Cascade Microphones FAT HEAD Bare Essentials Short Ribbon Microphone
  • Stereo Pair
  • Stereo Pair w/Accessories
$159.00

Description

Same ribbon motor and transformer as standard FAT HEAD - but without aluminum case, wood box and premium shockmount.

Unlike most ribbon motors designed today with an offset ribbon the new Cascade FAT HEAD houses a hand-tuned ribbon element that incorporates the legendary symmetrical ribbon design. This design offers a true figure 8 pattern. The corrugated aluminum membrane itself is positioned in the center from front to back, thus producing a balanced audio input signal to both sides of the ribbon assembly. This design is very useful when executing a mid-side or Blumlein recording set-up and also great for live stage use. The FAT HEAD warm full-bodied signature and increased sensitivity is what you would expect and demand from a professional ribbon microphone and the FAT HEAD delivers. The FAT HEAD is suited for guitar cabinets, drum over-heads, vocal, piano, horns, strings, and much more.

Single Set Includes

  • FAT HEAD BE Ribbon Microphone
  • New rubber mount Shock
  • Vinyl pouch
  • Specifications and typical measurement report

Stereo Set Includes

  • 2 x FAT HEAD BE Ribbon Microphone
  • 2 x New rubber mount Shock
  • Blumlein Bar w/Pouch
  • 2 x Vinyl mic pouches
  • Specifications and typical measurement reports
View AllClose

Specifications

Type: Ribbon (velocity) Microphone
Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W)
Polar pattern: Figure 8 Symmetrical design
Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
Output Impedance: <=200 Ohms
Recommended load impedance: >1000 Ohms
Max.SPL (1% THD @1000 Hz): 135 dB
Connector: 3-Pin male XLR
Size: 3" (O.D. grill), overall length 6 1/2", 1" (O.D. body)

View AllClose

0 Reviews

View AllClose