Aviom D800 A-Net Distributor

(No reviews yet) Write a Review
SKU:
D800
Availability:
Usually ships within 24 hours
Weight:
13.00 LBS
Shipping:
Calculated at Checkout
  • Aviom D800 A-Net Distributor
  • Aviom D800 A-Net Distributor
$1,599.00

Description

The D800 and D800-Dante A-Net Distributors provide the link between the input module or console card and the personal mixers, providing power and a copy of the digital audio stream to your Aviom personal mixers, utlitizing standard Cat-5e cables.

Both units also integrate additional advanced options for delivering high-channel-count audio streams to your personal mixers, streamlining connections between A360s and transmitters for wireless in-ear monitors, and integrating the A360 Display iOS app.

On the most basic level, the D800 does an unglamorous but important job: get power and audio to your personal mixers. Set-up is a breeze, with no IP addressing, routing, or switch managing to worry about, so you can get set up and start mixing in no time, without a lot of hassle.

Get more channels to your mixers
Used in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha®), the D800 combines up to four 16-channel A-Net streams for sending up to 64 channels directly from your digital console to your Aviom personal mixers. Mix channels can be individually selected for each A360 Personal Mixer, allowing each musician to mix exactly the sources they need.

Grow your system
If you need more than eight personal mixers, the D800 includes an A-Net Out port on the rear panel—perfect for sending the incoming audio stream (regardless of its original source) on to additional A-Net Distributors.

Precision Engineered for Reliability
From the innovative power supply sub-system to the mechanical design to the whisper-quiet thermal management, the D800 and D800-Dante are built to give you rock-solid performance you can count on.

Network Mix Back for wireless in-ears
If you're using A360 Personal Mixers, the D800 eliminates the need for running analog cables from A360s to the transmitter units for the in-ear monitors.

Extend the interface with iOS
The D800 manages communication between A360 Personal Mixers and supported iOS devices, allowing users to run the A360 Display™ app alongside their A360.

View AllClose

Specifications

A-Net to/from Personal Mixers (front panel)     Eight locking RJ45 connectors, powered; 2-position switch (I/II) accommodates A-16II and A320 (|) and the bidirectional A360 Personal Mixer (||)
A-Net In or A-Net Bridge In     Accepts Pro16 or Pro16e A-Net; One locking RJ45 connector
A-Net Out (rear panel)     Pro16e A-Net; One locking RJ45 connector, unpowered
A-Net Mixes Out     Pro16e A-Net; One locking RJ45 connector, unpowered; Provides up to 16 channels of Network Mix Back™ data from up to eight A360 Personal Mixers
Ethernet     One RJ45 connector
LEDs     Power On (red); Sync (green)
USB     Used for firmware updates
A-Net Cables     Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections
Output Voltage for Personal Mixers     24VDC, 0.5 amp; Transmitted over the Cat-5e cable
Power Supply     Internal, universal switching type, IEC connector
Input Voltage     100-240VAC, 50-60Hz, 300W; Fuse - 250VAC~ T4AL
Dimensions     19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U, 3.5" (88.9 mm) high
Weight     12.0 lbs (5.44 kg)

View AllClose

0 Reviews

View AllClose