Loading... Please wait...
  • Radial Engineering Tonebone Bumper
  • Radial Engineering Tonebone Bumper - Top View
  • Radial Engineering Tonebone Bumper - In's & Out's
  • Select between 3 electric guitars
  • Select between four acoustics
  • Select between four basses

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Specifications

Audio circuit type: Discrete class-A, except tuner output
Frequency response: ±<1dB 20Hz-20kHz
Gain: -0.22dB
Dynamic range: 109dB
Maximum input: +7dBu with trim fully clockwise (no level reduction)
Input impedance (trim mode): 220kΩ
Input impedance (drag mode): 20kΩ to 1MΩ
Output impedance: 120Ω
Equivalent input noise: -109dBu, A-weighted
Noise floor: -109dBu, A-weighted
Intermodulation distortion: 0.015% @ -20dBu
Total harmonic distortion (THD): 0.007% @ -20dBu
Phase deviation: -15° @ 20hZ, +5° @ 20kHz
Crosstalk: -94dB

Features
Tuner output: Always-on buffered output
LED indicators: Large 3mm OD ultra-bright LED's

General
Construction: 14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size: (L x W x D) 4.75" x 3.75" x 1.75" (120.65 x 95.25 x 44.45mm)
Weight: 1.4lbs (635 grams)
Shipping Size: (L x W x D): 6.25" x 4.25" x 3" (158.75 x 107.95 x 76.2mm)
Shipping Weight: 1.7lbs (771 Grams)
Current draw: 60mA
Warranty: Radial 3-year, transferable

Find Similar Products by Category

Vendors Other Products

Radial Engineering Tonebone Bumper

Price:
$169.99
SKU:
R800 7094 00
Weight:
1.70 LBS
Availability:
Usually ships within 24 hours.
Shipping:
Calculated at checkout
Quantity:


Product Description

Radial Engineering Tonebone Bumper

  • Connect up to four instruments to your stage amp
  • Sequential footswitch selector with LED's
  • Choice of Drag™ control or Trim on each input
  • Radial's Class-A input buffer for absolute best sound

The Bumper™ is a unity gain instrument selector that lets you connect up to four instruments and progressively advance through each input using a sequential footswitch. The sequence is determined by the input conections, whereby if only two instruments are plugged in, the footswitch will only toggle between the ones that are connected.

Each input features Radial's award-winning Class-A buffer for absolute fidelity while enabling longer cable runs without signal degradation. This is augmented with Drag™ control load correction that lets you adjust the load on each instrument for optimal signal transfer, natural tone and feel. Drag works equally well on single coil or humbucking pickups – on both electric guitar and bass. A selector switch for each input changes the Drag™ control to a Trim to balance louder sources such as an active bass or acoustic guitar with passive counterparts. This lets you quickly switch instruments without having to readjust levels on the stage amp. In addition to the ¼" stage amp output, the Bumper is equipped with a separately buffered tuner output. This is always on to allow on-the-fly tuning while eliminating any clocking noise or loading caused by the tuner.

Compact and made from 14-gauge steel, the Bumper is well equipped to protect against the harsh environment of professional touring while ensuring the instrument signal will be shielded against stray magnetic fields. Powered by a standard 9V supply, it can easily be integrated into a pedalboard using an off-the-shelf Boss®-style supply or multi-output power brick.

The Tonebone Bumper is the perfect interface for multi-instrumentalists, studio session players or artists that employ several guitars on stage.