Phoenix Audio DRS-Q4 MKII - Dual Mono Mic Pre with EQ & DI [CLOSEOUT]

(No reviews yet) Write a Review
SKU:
DRSQ4MKII
Weight:
16.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
On Sale
  • Phoenix Audio DRS-Q4 MKII - Dual Mono Mic Pre with EQ & DI [CLOSEOUT]
  • Phoenix Audio DRS-Q4 MKII - Dual Mono Mic Pre with EQ & DI [CLOSEOUT]
Now: $1,699.00
Was: $2,499.00

Description

The DRS-Q4 mk2 is a 4 Band Gyratory-based Eq with 11 selectable frequencies, and Mic, Line, and DI inputs. We know you will be as pleased with it’s sonic qualities as we are. The DRS-Q4 mk2 has the advantages of more than 25 years experience in audio engineering, today’s component and manufacturing technology, but still retaining “that sound” uniquely achievable through Class A design. Phoenix Audio is dedicated to the development of Class A discrete technology used within high build-quality equipment.

The DRS-Q4 mk2 uses our well proven and loved Class A output stage (DSOP-2) coupled with our custom wound output transformer, but also has our latest breakthrough in transformerless Class A, Discrete, truly-balanced Mic Input Technology which gives a “valve-like” sound. It also incorporates our high input impedance DI circuitry.

The Gyrator EQ circuit was designed around 40 years ago and was originally designed to emulate the characteristics of a coil or inductor EQ circuit without the issues that they can cause, the result is that our EQ circuit found in the DRSQ4M mk2 is a very powerful but musical EQ perfect for sculpting or crafting vocals, drums or instruments etc whilst still being able to be used on mix bus duties.

Specifications

  • 1U unit: With 240V/110V mains voltage input selector switch
  • Class A (DSOP-2) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB,
  • Maximum Output Level: +26dBu @ 1kHz
  • Noise: -90dB @ 20Hz to 20kHz.
  • Output connections: XLR and TSR 1/4″ Jack on rear
  • Phoenix Audio’s unique Class A, transformer-less, True balanced Mic input stage.
  • Phoenix Audio’s custom wound output transformer.
  • Microphone/Line input: XLR on Rear Panel
  • DI inputs: ¼” TSR Jack on Front Panel
  • Individual Earth Lift: Push-button Switches
  • Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
  • Gain reduction: -30dB push-button Mic/Line switch (Mic input)
  • High Input Impedance DI: Mono 1/4″ Jack on front panel (no FETs)
  • Gain Meter: LED Metering. (Green = 0dB, Yellow = +8dB, corresponding to “4” and “6” on a PPM Meter).
  • Phantom Power: Switchable phantom on Push-button Switch
  • High Pass Filter: Roll-off starts at 120Hz @ 12dB per Octave.
  • Phase Reverse: on Push-button Switch
  • Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
  • Frequency Response: DI Input Stage: -0.3dB @ 40Hz, – 0.5dB @ 25kHz
  • Typical Headroom: +24dB on Mic-Pre stage
  • Gyratory-based EQ Frequency Centres: (4 Bands) High – 15K, 10K, Hi Mid – 6K, 3K, 1K6, Low Mid – 800Hz, 400Hz, 200Hz, Low – 130Hz, 80Hz, 40Hz
  • EQ Cut/Boost Levels: 16dB Cut/Boost Per Band with fully detented pots in 21 positions
  • DI Stage gain: Maximum of 20dB
  • All units are wired with PTFE silver military grade cable
View AllClose

0 Reviews

View AllClose