Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Specifications

D6 Kick Drum Microphone 

Transducer Type Dynamic
Frequency Response 30 Hz - 15 kHz
Polar Pattern Cardioid / Hypercardioid
Output Impedance 200 ohms
Sensitivity 0.8 mV / Pa @ 80 Hz
Capsule Technology VLM Type E
Off Axis Rejection >20 dB
Maximum SPL ≥144 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Machined Aluminum / Black Hard Coat
Weight 217 g / 7.7 ounces
Length 117 mm / 4.6 inches

i5 Multi-Purpose Instrument Microphone

Transducer Type Dynamic
Frequency Response 50 Hz - 16 kHz
Polar Pattern Cardioid
Output Impedance 150 ohms
Sensitivity 1.5 mV / Pa @ 1k
Capsule Technology VLM Type B
Off Axis Rejection > 23 dB
Maximum SPL ≥ 140 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Die cast Zinc Alloy / Black E-coat
Weight 183 g / 6.5 ounces
Length 141.5 mm / 5.6 inches

D2 Dynamic Instrument Microphone 

Transducer Type Dynamic
Frequency Response 80 Hz - 18 kHz
Polar Pattern Hypercardioid
Output Impedance 250 ohms
Sensitivity 1.2 mV / Pa @ 1k
Capsule Technology VLM Type B
Off Axis Rejection >30 dB
Maximum SPL ≥144 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Machined Aluminum / Black Hard Coat
Weight 128 g / 4.5 ounces
Length 100 mm / 3.9 inches

D4 Dynamic Microphone

Transducer Type Dynamic
Frequency Response 40 Hz - 18 kHz
Polar Pattern Hypercardioid
Output Impedance 200 ohms
Sensitivity 1.4 mV / Pa @ 1k
Capsule Technology VLM Type D
Off Axis Rejection >20 dB
Maximum SPL ≥144 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Machined Aluminum / Black Hard Coat
Weight 128 g / 4.5 ounces
Length 100 mm / 3.9 inches

SCX25A - Large Diaphragm Condenser Microphone

Transducer Type Condenser
Frequency Response 20 Hz - 20 kHz
Polar Pattern Cardioid
Output Impedance 200 ohms
Sensitivity 1k 28 mV / Pa
Equivalent Noise Level 14 dB (A weighted)
Signal to Noise Ratio 80 dB
Maximum SPL SCX25A ≥135 dB
Dynamic Range 121 dB
Power Requirements 48-52 volts phantom
Connector Switchcraft® or Audix male XLR connector
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Machined Brass / Multi-layer Class ‘A’ liquid
Weight 244 g / 8.6 ounces
Length 148 mm / 5.8 inches

SCX1HC Studio Condenser Microphone

Transducer Type Condenser
Frequency Response 40 Hz - 20 kHz
Polar Pattern Hypercardioid
Output Impedance 200 ohms
Sensitivity 15 mV / Pa  @ 1k
Equivalent Noise Level 14 dB (A weighted)
Signal to Noise Ratio 80 dB
Maximum SPL 130 dB
Dynamic Range 116 dB
Power Requirements 48-52 volts
Connector Switchcraft® or Audix male XLR connector
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Brass / Multi-layer Class ‘A’ liquid
Weight 114 g / 4 ounces
Length 104 mm / 4.1 inches

Find Similar Products by Category

Vendors Other Products

Audix Studio Elite-8 8-Piece Studio Microphone Kit

Price:
$2,499.00
SKU:
STE-8
Brand:
Weight:
14.00 LBS
Availability:
Usually ships within 24 hours
Shipping:
Calculated at checkout


Product Description

Designed, assembled, and tested by Audix in the USA, The Audix D Series and i5 represent the finest dynamic instrument microphones available today.  Combined with the SCX25A and the SCX1HC, Audix offers the Studio Elite 8 (STE8) - a compelling array of eight microphones that will suit a wide variety of needs for critical recording applications. This collection of microphones enables artists and engineers to capture the sound at the source, regardless of the type of instrument or genre of music.

D6 - Kick Drum

The D6 is used for stage, studio and broadcast applications. Designed with a cardioid pickup pattern for isolation and feedback control, the D6 is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.

Lightweight, compact and easy to position, the D6 is an excellent choice for miking instruments requiring extended low frequency reproduction such as kick drums, large toms and bass cabinets.  The D6 transformer less design, low impedance and balanced output allow for interference-free performance.

i5 - Snare

Designed, assembled and tested by Audix in the USA, the i5 is a dynamic instrument microphone used for stage, studio and broadcast applications. The i5 is able to handle sound pressure levels in excess of 140 dB without distortion and can be used to mic a wide variety of musical instruments, guitar and bass cabinets, vocals and speech.

The i5 is characterized with a cardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ (Very Low Mass) diaphragm for natural, accurate sound reproduction.

The i5 is sturdy, compact and easy to position. With a wide frequency response of 50 Hz - 16 kHz, the i5 provides clear, accurate, natural sound reproduction without having to rely on EQ. The i5 includes a precision cast zinc alloy body, steel grill, black E-coat finish, laser etched model and serial number, Switchcraft® or Audix XLR connector and is supplied with a heavy duty nylon mic clip.

D2(two) - Rack Toms

The D2 is designed, machined, assembled and tested by Audix in the USA, the D2 is a dynamic instrument microphone used for stage, studio and broadcast applications. The D2 is characterized with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ (Very Low Mass) diaphragm for natural, accurate sound reproduction.

The D2 is lightweight, compact and easy to position. With a wide frequency response of 80 Hz - 18 kHz and the ability to handle sound pressure levels in excess of 144 dB, the D2 is an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophone, guitar cabinets and brass.

The D2 includes a precision machined aluminum body, Black anodized finish, laser etched model and serial number, steel mesh grill, Switchcraft® or Audix XLR connector and is supplied with a tension-fit heavy duty nylon mic clip.

Transformerless design, low impedance and balanced output allow for interference-free performance even with long cable runs.

D4 - Floor Tom

With a wide frequency response of 40 Hz - 18 kHz and the ability to handle SPLs in excess of 144 dB, the D4 is an  excellent choice for miking instruments requiring precise, low frequency reproduction such as large rack toms, floor toms, cajon, djembe, tympani, leslie bottom, bass flute, saxophone and baritone saxophone, trombone, acoustic bass, bass cabinets and small kick drums.

The D4 is lightweight, compact and easy to position.  Used for stage, studio and broadcast applications, the D4 is designed with a hypercardioid pickup pattern for isolation and feedback control.  The D4 is also equipped with a VLM™ diaphragm for natural accurate sound reproduction.

SCX25A - Large Diaphragm Microphone

The SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock-mounted within an intricate machined brass ring, the capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open air sound with exceptional detail and realism.

The SCX25A is consistent when responding to on and off-axis signals. This mic exhibits outstanding phase coherence and minimal proximity effect. With a wide cardioid polar pattern, the SCX25A enables the sound engineer to blend the sound of the instrument or vocal with the sound of the room. The SCX25A will handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.

The SCX25A is perfectly suited to capture the sound of acoustic instruments such as pianos, guitars, vibes, woodwinds, brass, percussion toys, drums, orchestra and symphony sections.

SCX1HC - High Hat

The principal applications for the SCX1HC are recording, sound design, broadcast and live sound applications. Sensitivity, pin-point accuracy, low profile and consistency illustrate the vigorous attributes of the SCX1HC.

The SCX1HC offers a consistent response to on and off axis signals while exhibiting excellent phase coherence and minimal proximity effects. With its wide frequency response, accuracy and sensitivity, the SCX1HC is the perfect selection for miking overhead, room ambience, orchestral sections, stringed instruments, pianos, vibes and sound effects.

The SCX1HC has a 21 mm gold vapor capsule, miniaturized electronics and an extremely small footprint.

Features

  • All-in-one solution for studio miking
  • Instrument-specific mics for optimal results
  • Rugged Audix quality
  • Aluminum road case

What's In The Box

  • 1-D6 with DCLIP
  • 1-i5 with DVICE
  • 2-D2  with DVICES
  • 1-D4 with DVICE
  • 1-SCX1HC with DCLIP and windscreen
  • 2-SCX25A with SMT25 shock mounts
  • 1 Aluminum Road Case