Audix ADX18 Gooseneck Condenser Microphone

(No reviews yet) Write a Review
SKU:
ADX18
UPC:
687471061350
Weight:
2.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • Audix ADX18 Gooseneck Condenser Microphone
  • Audix ADX18 Gooseneck Condenser Microphone
$209.00

Description

The ADX18 is professional miniature gooseneck condenser microphone designed for applications such as podium, presentation, meetings and teleconferencing. Known for its clarity, excellent sound quality and ease of operation, the ADX18 will accurately capture and reproduce vocals from a comfortable distance.

The ADX18 is characterized with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from other ambient noise in the room or on the stage. The ADX18 mic is also available in a hypercardioid polar pattern for tighter pick-up control. With a wide frequency range of 40 Hz - 18 kHz, the ADX18 provides natural sound with exceptional transient response.

The ADX18 is equipped with an integrated preamp circuitry built into the base of the XLR and may be mounted permanently via the supplied flange mount or with an optional base with an internal shock mount (SMT1218R). The mic may also be used on a standard mic stand or in conjunction with the Audix ATS-10 table stand with lighted on-off switch.

Manufactured with very high standards and tight tolerances, the ADX18 features a machined brass body, field replaceable capsule and a variety of optional accessories. The ADX18 operate on phantom power of 18 - 52 Volts and are available in non-reflective black matte finish.

Features

  • Natural accurate sound
  • Interchangeable capsule
  • Low profile design
  • Dual gooseneck sections allows for precise positioning
  • Low noise electronics
  • Available with cardioid or hypercardioid polar pattern

Applications

  • Pulpit, podium
  • Board meetings, teleconferencing
  • Video, recording
  • Room security or monitoring

Supplied Accessories

  • Flange table mount (TM1218)
  • External foam windscreen (WS1218)
View AllClose

Specifications

Transducer Type Pre-Polarized Condenser
Frequency Response 40 Hz - 18 kHz
Polar Pattern Hypercardioid
Output Impedance 150 Ohms balanced
Sensitivity 25 mV / Pa @ 1k
Equivalent Noise Level 28 dB (A weighted)
Signal to Noise Ratio 66 dB
Power Requirements 18 - 52 Volts phantom
Maximum SPL ≥120 dB
Cable/Connector 3 pin gold plated male XLR connector
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing/Finish Machined Auminum and Brass / Black matte
Weight 159 g / 5.6 ounces
Length 558 mm / 22 inches

View AllClose

0 Reviews

View AllClose