Description
With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO 44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic’s self-contained electronics eliminate the need for external power modules. The PRO 44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance.
The microphone requires 9V to 52V phantom power for operation. The microphone's cardioid polar pattern provides a 120° angle of acceptance (cardioid in hemisphere above mounting surface). The microphone includes a 7.6 m (25') output cable terminating in TA3F-type and XLRM-type connectors. The microphone’s rubber non-slip bottom pad minimizes mechanical coupling of surface vibration to the microphone. The microphone is enclosed in a rugged housing with a black finish.
Features
- Low profile for minimum visibility
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25' (7.6 m) detachable cable (TA3F to XLRM-type)
Specifications
POLAR PATTERN Half-cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE 70-16,000 Hz
OPEN CIRCUIT SENSITIVITY -25 dB (56.2 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 114 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 86 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 66 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 9-52V, 2 mA typical
WEIGHT 2.4 oz (67 g)
DIMENSIONS 2.87" (73.0 mm) maximum width, 3.56" (90.5 mm) maximum length, 0.59" (15.0 mm) height
OUTPUT CONNECTOR TB3M-type
CABLE 25' (7.6 m) long, with TA3F and XLRM-type connectors
